Nissan Maxima Push-Type Trim Retainer | 20mm Drive Pin | 19274
✓ In stock
The South Mountain Supply 19274 is a push-type drive-pin trim retainer for Nissan Maxima vehicles. This 20mm head clip secures fender liners, bumper panels, and body trim components to the body structure with a two-stage snap that holds firmly through normal vibration and road exposure.
Specifications
- Type: Push-Type with Drive Pin
- Head Diameter: 20mm
- Stem Length: 9mm
- Hole Size: 8mm
- Color: Black
- Pack Sizes Available: 15, 30, 60, 90
Vehicle Fitment
- Nissan Maxima — verify OEM number against your existing retainer to confirm year range compatibility
Cross-Reference Numbers
- Nissan OEM: Verify OEM number against your existing retainer before ordering
What does the 19274 secure on the Nissan Maxima?
The 19274 is used to retain fender liners, bumper trim panels, and body-side trim components on Nissan Maxima vehicles. The 9mm stem length is optimized for single-layer panel mounting, and the 8mm hole size is the standard Nissan mounting hole dimension for this class of trim retainer.
How does a drive-pin push-type retainer work?
The 19274 consists of a body with a center drive pin. Insert the body into the 8mm mounting hole with the pin raised. Press the pin flush with the top of the head — this forces the retention tabs outward behind the panel and locks the clip in place. To remove, pry the center pin up with a trim tool to collapse the tabs, then pull the body free.
How do I replace trim retainers on a Nissan Maxima?
Use a plastic trim removal tool to pry up the center pin on each retainer. Once the pin is raised, press the retainer body out from behind the panel. Remove any broken clip fragments from the mounting holes. Press the new 19274 retainers into the holes with the pin in the raised position, reinstall the panel or liner, then press each pin flush to lock all retainers in place.
What pack size should I order?
The 19274 is available in packs of 15, 30, 60, and 90. A pack of 15 covers a spot repair or single-section fender liner job. A pack of 30 handles a full front or rear fender liner replacement on most Maxima configurations. Packs of 60 and 90 offer the best cost per retainer for shops servicing multiple Nissan vehicles.
Can I reuse these retainers after removing a fender liner?
Drive-pin retainers can often be reused if the center pin and retention tabs are still intact after removal. Inspect each retainer before reinstalling — if the tabs are cracked or the pin head is damaged, replace with a new 19274. Damaged retainers will not lock securely and can result in a loose or rattling liner.