Nissan Infiniti Fender Bumper & Body Trim Retainer 01553-2DR9A | 22039
✓ In stock
The South Mountain Supply 22039 is a push-type trim retainer for Nissan and Infiniti vehicles, used to secure fender liners, bumper panels, and body trim components. The wide 20mm bottom head distributes load across panel surfaces to prevent pull-through in plastic trim applications.
Specifications
- Type: Push-Type Retainer
- Application: Fender, Bumper & Body Trim
- Material: Nylon
- Color: Black
- Top Head Size: 16 × 19mm
- Bottom Head Diameter: 20mm
- Stem Length: 12mm
- Hole Size: 8mm
- Pack Sizes Available: 15, 30, 60, 90
Vehicle Fitment
- Nissan vehicles — verify OEM number against your existing retainer to confirm year range compatibility
- Infiniti vehicles — verify OEM number against your existing retainer to confirm year range compatibility
Cross-Reference Numbers
- Nissan OEM: 01553-2DR9A
What panels does the 22039 secure on Nissan and Infiniti vehicles?
The 22039 is used to secure fender liners (inner fender splash shields), bumper trim components, and body-side trim panels on Nissan and Infiniti vehicles. The wide 20mm bottom head is designed to span the mounting hole and distribute force across a larger panel surface, reducing the risk of pull-through in lightweight plastic trim panels.
What is the significance of the rectangular top head on the 22039?
The 22039 has a rectangular 16 × 19mm top head rather than a round head. This non-circular shape provides additional anti-rotation resistance in the trim panel mounting hole, preventing the retainer from spinning when removed or when the panel flexes. It also gives a larger footprint on the panel face for a more secure trim hold.
How do I install the 22039?
Align the 8mm stem with the mounting hole in the trim panel or body structure. Press the retainer firmly until the bottom head seats behind the panel and the top head contacts the panel surface. For drive-pin variants, press the center pin flush after the body is seated. No additional tools are required for installation.
What pack size should I order?
The 22039 is available in packs of 15, 30, 60, and 90. A pack of 15 is appropriate for a single fender liner or bumper trim repair. A pack of 30 covers a full vehicle front and rear bumper trim retainer replacement. Packs of 60 and 90 offer the best per-retainer value for shops that regularly service Nissan and Infiniti vehicles.
How does the 22039 compare to the 19274 Nissan retainer?
Both the 22039 and the 19274 are Nissan push-type retainers with 8mm hole sizes and 20mm head diameters, but they differ in head geometry and stem length. The 22039 has a 12mm stem and a rectangular top head, while the 19274 has a 9mm stem and a round head. For the correct retainer, verify the stem length and head shape against the retainer being replaced.