{"title":"Tapes \u0026 Adhesives","description":"\u003cp\u003eSouth Mountain Supply stocks a comprehensive range of tapes and adhesives for professional auto glass installation. From urethane adhesives and primer to specialty tapes used in windshield and glass replacement, our selection covers every bonding and sealing need on the job. Trusted by glass shops across North America since 1992.\u003c\/p\u003e","products":[{"product_id":"foam-core-butyl-individually-boxed","title":"Marcy Foam-Core Butyl Tape — 6mm × 12ft | Individually Boxed | ME612C","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME612C foam-core butyl tape in a single-application box — the correct butyl for windshield installation where foam-core is required. The foam center delivers compression deflection and rebound that solid butyl cannot match, creating a leak-proof seal even when the glass settles unevenly during cure. The 6mm profile is the standard width for most passenger car and light truck windshield applications. Many Ford, Lincoln, and Mercury OE installation procedures specifically require foam-core butyl — ME612C is the go-to product for those platforms. Individually boxed and ready to use on the job.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME612C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6mm × 12ft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e Foam-core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Individually boxed (single-application)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Windshield and fixed-glass installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply to the pinch weld or vehicle channel before setting the glass. Designed for windshield and urethane-bonded fixed-glass installations where foam-core butyl is required by OEM or quality-standard procedures. Not intended for mechanically-fastened glass — use solid-core butyl (ME615S, ME815S, ME915S) for those applications.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is foam-core butyl and why is it different from solid-core?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eFoam-core butyl has a cellular foam center wrapped in butyl. The foam compresses as the glass is set and rebounds to fill gaps and voids, creating a conforming, leak-free seal. Solid-core butyl seals well but doesn't have the same rebound. Ford, Lincoln, Mercury OE procedures and many professional installation quality standards require foam-core because of this superior void-filling and leak-resistance characteristic.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhich vehicles require foam-core butyl by OEM spec?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eMany Ford, Lincoln, and Mercury vehicles specifically call out foam-core butyl in their OEM windshield installation procedures. When servicing a Ford platform, default to foam-core. For other makes, refer to the vehicle-specific procedure — both foam-core and solid-core are used industry-wide, and using the wrong type can affect seal quality.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 6mm vs. 8mm foam-core butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 6mm profile (ME612C) suits the majority of standard passenger cars and light trucks with typical pinch weld channel dimensions. The 8mm profile (ME810B) is used when a wider bead is specified or when the channel is larger than standard. Match the profile to the OEM procedure or pinch weld dimension — 6mm is the most common choice across most vehicle platforms.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes foam-core butyl work in cold weather?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Marcy foam-core butyl remains workable across a wide temperature range. In temperatures below 40°F, warm the tape slightly before application to improve conformability and adhesion to the pinch weld. Avoid overheating — excessive heat will deform the foam core before the glass is set.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy is individually boxed butyl useful for mobile installers?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe Butyl-in-a-Box format keeps the tape clean and protected from dust, UV, and contamination until needed. For mobile installers working from a van or truck, it eliminates the handling issues of unwrapped bulk rolls and simplifies per-job material tracking. Each box contains a single-application length — open, use, done.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44338511184087,"sku":"ME612C","price":7.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/butyl_page_img.jpg?v=1702924533"},{"product_id":"copy-of-foam-core-butyl-individually-boxed","title":"Marcy Solid-Core Butyl Tape — 1\/4\" × 10ft | Individually Boxed | ME625","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME625 solid-core butyl tape in a single-application box — the all-purpose butyl for sealing mechanically-fastened side and back glass, re-adhering door vapor barriers, and everyday automotive sealing tasks. The 1\/4\" round profile is the most common solid butyl diameter in the auto glass trade, handling the majority of channel widths and gap sizes. Works reliably in hot and cold weather. Individually boxed for the mobile installer — no cutting, no re-wrapping. \u003cstrong\u003eNot intended for windshield installation — use foam-core butyl (ME612C or ME810B) for windshield applications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME625\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/4\" (6.4mm) round × 10ft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e Solid-core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Individually boxed (single-application)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mechanically-fastened side and back glass, door vapor barriers, general automotive sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply along the glass channel or frame opening before pressing the glass into position. For mechanically-fastened side, rear, and quarter glass on trucks, vans, and SUVs, and for door vapor barrier re-adhesion and general body sealing tasks. Do not use for urethane windshield installations — use foam-core butyl for those.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is solid-core butyl used for?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl is the correct sealant for mechanically-fastened glass — side windows, vent glass, sliding rear windows, and quarter glass on trucks and SUVs where fasteners (not urethane) hold the glass in position. It is also commonly used for re-adhering door poly vapor barriers and for general body sealing where a flexible, weather-resistant bead is needed. It is not the correct product for urethane-bonded windshield installation — use foam-core butyl for those applications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between solid-core and foam-core butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl is an all-butyl bead. It conforms to the channel and seals effectively, but does not have the rebound compression of foam-core. Foam-core is designed specifically for windshield installation, where the glass settles during cure and voids must be filled by the foam rebound. For mechanically-fastened glass where fasteners control position, solid-core is the correct and more economical choice.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 1\/4\" vs. 5\/16\" vs. 3\/8\" solid butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe three profiles correspond to different gap sizes. The 1\/4\" (ME625\/ME615S) handles the majority of standard applications and is the most commonly used diameter. Use 5\/16\" (ME825\/ME815S) or 3\/8\" (ME925\/ME915S) when the channel or gap is wider and a fuller bead is needed to seal properly. Too small leaves voids; too large makes glass positioning difficult.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes solid butyl work in both hot and cold weather?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy solid butyl is formulated for all-weather use. In cold temperatures it stiffens but remains workable — warming slightly in your hands or with low heat improves conformability. In hot weather it becomes softer and more pliable, which can ease application but requires care not to stretch or distort the bead during placement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eShould I use boxed or bulk solid butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eIndividually boxed (ME625, ME825, ME925) is ideal for mobile installers — each box is a clean, single-application length ready to use on the job. Bulk packs (ME615S, ME815S, ME915S) provide a longer roll at a lower cost per foot, making them better value for shops doing high-volume work where material efficiency matters more than per-job convenience.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44338521309399,"sku":"ME625","price":8.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/41uMd0QNYJL._SL1200.jpg?v=1705087874"},{"product_id":"marcy-masking-tape","title":"Marcy Automotive Masking Tape — 2\" × 60 yds | Blue | ME1007-200","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME1007-200 automotive masking tape in blue — the professional-grade tape for protecting painted surfaces during windshield replacement, body work, and moulding installation. Peels cleanly without leaving residue and resists outdoor weathering including rain, heat, cold, and UV. The 2\" width covers pinch welds, trim edges, and body panels efficiently in one pass. Blue color gives technicians a clear visual reference to confirm surface coverage before work begins. Tears by hand — no scissors needed.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME1007-200\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 60 yards per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Surface masking and paint protection during auto glass and body work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply to painted surfaces, trim, and body panels before glass removal or installation to protect against adhesive drips, urethane contamination, and tool contact. Tear by hand to length. Remove promptly after work is complete — extended exposure to heat and sun increases adhesive bond strength and can make removal more difficult.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs this tape safe for automotive paint?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy masking tape is formulated for automotive painted surfaces and is designed to peel cleanly without lifting clear coat or leaving adhesive residue when removed promptly. As with all masking tapes, remove it the same day it's applied; extended exposure to direct sun and heat increases adhesive bond strength and can make clean removal more difficult.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat does \"weather resistant\" mean for a masking tape?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eWeather-resistant means the tape maintains its adhesion and won't curl, blow off, or saturate in rain, heat, cold, or direct sunlight during a typical workday. For auto glass jobs where vehicles sit outside during urethane cure, the tape stays in place and peels cleanly when you're ready to remove it. It is not intended for long-term outdoor exposure — remove it the same day.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat's the difference between blue and black Marcy masking tape?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eME1007-200 (blue) and ME1008-200 (black) perform identically — the difference is color. Blue is the standard shop color, highly visible against most paint finishes and easy to see when confirming full coverage. Black is preferred when working on very dark vehicles or when a low-visibility masking appearance is preferred for customer-facing work before the tape is removed.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan this tape be torn by hand?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy masking tape tears cleanly by hand without scissors. For mobile installers and busy shop work, this makes applying and cutting lengths fast without stopping to find a blade. Tear from the roll edge for a clean, straight tear.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow much masking tape does a typical windshield job use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eA typical windshield masking job uses 10–20 feet of tape to protect the pinch weld, cowl, and surrounding painted panels. At 60 yards (180 feet) per roll, one ME1007-200 covers approximately 9–18 complete windshield jobs. High-volume shops typically go through one roll every few days.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44338650710231,"sku":"ME1007-200","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/GTME0066_3x300OrangeMarcyTape_Angle1_grande_6720a9a9-15f8-4cbd-9e5c-63e5172478ba.webp?v=1702949646"},{"product_id":"molding-tapes","title":"Marcy Molding Retention Tape — 1.5\" × 108ft | Clear | ME0073","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME0073 molding retention tape holds exterior mouldings firmly in position while urethane cures, then peels away cleanly without lifting paint or leaving adhesive residue. The 1.5\" width covers most exterior moulding profiles in one strip. Clear color is the most neutral option — a good choice when the vehicle may be seen by the customer before tape removal. Printed \"REMOVE WITHIN 24 HOURS\" along the length to prevent customer comebacks from delayed removal. Perforated every foot for easy hand-tearing without scissors.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME0073\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1.5\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 108ft per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Exterior moulding retention during urethane cure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply directly over the installed moulding to hold it in position while the urethane adhesive beneath fully cures. Remove within 24 hours of application. Compatible with factory paint, clear coat, and most vinyl and wrap finishes. Perforated every foot for clean hand-tearing to any length.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow long should I leave the retention tape on?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eRemove within 24 hours — this reminder is printed directly on the tape to prevent customer callbacks. Leaving it longer increases adhesive bond strength, especially in heat and direct sun, and can make clean removal difficult or cause paint damage. In hot conditions, err toward earlier removal.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this tape pull paint or leave residue?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eMarcy retention tape is formulated specifically for automotive exterior painted surfaces and is designed to release cleanly when removed within the 24-hour window. It works on factory paint, clear coat, and most films and wraps. Adhesive bond strength increases with heat and time, so prompt removal is the key to residue-free release.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat's the difference between clear, blue, and orange?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eClear (ME0073), blue (ME0076), and orange (ME0072) all perform identically — the difference is visual only. Clear is least noticeable on the vehicle, preferred when the customer may see the car before tape removal. Blue and orange are easier for technicians to see when confirming full moulding coverage and when locating tape to remove it at the end of the job.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow much tape does a typical moulding job use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eA typical windshield moulding installation uses 8–14 feet depending on glass size and moulding run length. At 108 feet per roll, one roll covers approximately 8–12 complete windshield jobs. Door panel or quarter moulding strips use 3–6 feet per panel.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs this tape UV and weather resistant?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Marcy retention tape is all-weather and UV-resistant, designed to hold through rain, heat, cold, and direct sun during the urethane cure period. Even if the vehicle is driven or sits outside before you return to remove the tape, it maintains adhesion and peels cleanly within the 24-hour window.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44338655035607,"sku":"ME0073","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/GTME0072_MarcyClearWindshieldAdhesiveTape_Angle1_1024x1024_2x-2159706886.jpg?v=1702931625"},{"product_id":"foam-core-butyl-8mm-x-10-individually-boxed","title":"Marcy Foam-Core Butyl Tape — 8mm × 10ft | Individually Boxed | ME810B","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME810B foam-core butyl tape in a single-application box — the wider 8mm profile for windshield and fixed-glass installations requiring a larger bead. The foam center delivers compression deflection and rebound that solid butyl cannot match, creating a leak-proof seal even when the glass settles unevenly during cure. Ideal for vehicles with wider pinch weld channels, sunroofs, backsliders, and custom van or RV windows where a fuller butyl profile is needed. Many Ford, Lincoln, and Mercury OE installation procedures require foam-core butyl — ME810B covers those platforms when 8mm is specified. Individually boxed and ready to use on the job.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME810B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 8mm × 10ft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e Foam-core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Individually boxed (single-application)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Windshield, sunroof, backslider, and fixed-glass installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply to the pinch weld or vehicle channel before setting the glass. The 8mm profile is used when a wider channel or heavier bead is required. Designed for urethane-bonded fixed-glass installations where foam-core butyl is specified. Not intended for mechanically-fastened glass — use solid-core butyl for those applications.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is foam-core butyl and why is it different from solid-core?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eFoam-core butyl has a cellular foam center wrapped in butyl. The foam compresses as the glass is set and rebounds to fill gaps and voids, creating a conforming, leak-free seal. Solid-core butyl seals well but doesn't have the same rebound. Ford, Lincoln, Mercury OE procedures and many professional installation quality standards require foam-core because of this superior void-filling and leak-resistance characteristic.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 8mm vs. 6mm foam-core butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 8mm profile (ME810B) is used when the OEM procedure or the vehicle's pinch weld channel calls for a wider bead — typically larger vehicles, vans, trucks with wide channel openings, or custom van and RV windows. The 6mm profile (ME612C) covers the majority of standard passenger cars and light trucks. When in doubt, match to the OEM procedure or measure the channel width.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhich vehicles require foam-core butyl by OEM spec?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eMany Ford, Lincoln, and Mercury vehicles specifically call out foam-core butyl in their OEM windshield installation procedures. When servicing a Ford platform, default to foam-core. For other makes, refer to the vehicle-specific procedure — both foam-core and solid-core are used industry-wide, and using the wrong type can affect seal quality.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes foam-core butyl work in cold weather?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Marcy foam-core butyl remains workable across a wide temperature range. In temperatures below 40°F, warm the tape slightly before application to improve conformability and adhesion to the pinch weld. Avoid overheating — excessive heat will deform the foam core before the glass is set.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy is individually boxed butyl useful for mobile installers?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe Butyl-in-a-Box format keeps the tape clean and protected from dust, UV, and contamination until needed. For mobile installers working from a van or truck, it eliminates the handling issues of unwrapped bulk rolls and simplifies per-job material tracking. Each box contains a single-application length — open, use, done.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44394654007511,"sku":"ME810B","price":8.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/butyl_page_img_af85a855-7e98-4d7e-96a0-529ba983c22e.jpg?v=1705083840"},{"product_id":"copy-of-solid-core-butyl-1-4-x-10-round-individually-boxed","title":"Marcy Solid-Core Butyl Tape — 5\/16\" × 10ft | Individually Boxed | ME825","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME825 solid-core butyl tape in a single-application box — the 5\/16\" round profile for mechanically-fastened glass and general automotive sealing where a medium-diameter bead is needed. Steps up from the standard 1\/4\" when the channel or gap requires a fuller butyl profile to seal completely. Works reliably in hot and cold weather. Individually boxed for the mobile installer — no cutting, no re-wrapping. \u003cstrong\u003eNot intended for windshield installation — use foam-core butyl (ME612C or ME810B) for windshield applications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME825\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5\/16\" (7.9mm) round × 10ft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e Solid-core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Individually boxed (single-application)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mechanically-fastened side and back glass, door vapor barriers, general automotive sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply along the glass channel or frame opening before pressing the glass into position. The 5\/16\" profile fills wider channels than the standard 1\/4\" while remaining manageable for positioning the glass. For mechanically-fastened side, rear, and quarter glass and general body sealing. Do not use for urethane windshield installations — use foam-core butyl for those.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is solid-core butyl used for?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl is the correct sealant for mechanically-fastened glass — side windows, vent glass, sliding rear windows, and quarter glass on trucks and SUVs where fasteners hold the glass in position. It is also used for door poly vapor barrier re-adhesion and general body sealing where a flexible, weather-resistant bead is needed. It is not the correct product for urethane-bonded windshield installation — use foam-core butyl for those.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 5\/16\" instead of 1\/4\" or 3\/8\"?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eUse 5\/16\" (ME825\/ME815S) when the channel gap is too wide for the 1\/4\" bead to fill completely, but the 3\/8\" diameter would create too much resistance positioning the glass. The 5\/16\" is the middle profile — common on mid-size trucks, vans, and SUVs with moderately wider channels than standard passenger cars. When in doubt, match to the gap width in the seated position.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between solid-core and foam-core butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl is an all-butyl bead that seals effectively for mechanically-fastened glass. Foam-core butyl has a foam center that provides rebound compression — this is required for urethane windshield installation where the foam fills voids as the glass cures. Do not substitute one for the other in windshield applications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes solid butyl work in both hot and cold weather?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy solid butyl is formulated for all-weather use. In cold temperatures it stiffens slightly but remains workable with light warming. In hot weather it becomes softer and more pliable, which aids application but requires care not to stretch the bead during placement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eShould I use boxed or bulk solid butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eIndividually boxed (ME625, ME825, ME925) is ideal for mobile installers — each box is a clean, single-application length. Bulk packs (ME615S, ME815S, ME915S) offer a longer roll at lower cost per foot, better value for shops doing high-volume work where material efficiency outweighs the per-job convenience of the boxed format.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44394658234583,"sku":"ME825","price":9.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/51Wtvh3RNqL._AC_SL1200.jpg?v=1705087892"},{"product_id":"copy-of-solid-core-butyl-5-16-x-10-round-individually-boxed","title":"Marcy Solid-Core Butyl Tape — 3\/8\" × 10ft | Individually Boxed | ME925","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME925 solid-core butyl tape in a single-application box — the 3\/8\" round profile for mechanically-fastened glass applications with larger channel gaps and for heavy-duty body sealing tasks. The widest standard solid butyl profile, filling gaps that smaller diameters can't seal properly. Works reliably in hot and cold weather. Individually boxed for the mobile installer — no cutting, no re-wrapping. \u003cstrong\u003eNot intended for windshield installation — use foam-core butyl (ME612C or ME810B) for windshield applications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME925\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8\" (9.5mm) round × 10ft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e Solid-core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Individually boxed (single-application)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mechanically-fastened glass with wide channels, heavy-duty body sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply along the glass channel or frame opening before pressing the glass into position. The 3\/8\" profile is the largest standard solid butyl size, used when a substantial bead is needed to fill a wide channel gap completely. For mechanically-fastened side, rear, and quarter glass on larger trucks and vans. Do not use for urethane windshield installations — use foam-core butyl for those.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is solid-core butyl used for?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl is the correct sealant for mechanically-fastened glass — side windows, vent glass, sliding rear windows, and quarter glass where fasteners hold the glass in position. It is also used for door poly vapor barrier re-adhesion and general body sealing where a flexible, weather-resistant bead is needed. It is not the correct product for urethane-bonded windshield installation.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 3\/8\" instead of 1\/4\" or 5\/16\"?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 3\/8\" (ME925\/ME915S) is used when the channel gap is large enough that smaller profiles leave voids or don't compress enough to fully seal. Common applications include larger trucks, full-size vans, and commercial vehicles with wider glass channels, or any installation where the OEM procedure calls for a 3\/8\" butyl bead specifically. When in doubt, verify the channel width in the seated glass position.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between solid-core and foam-core butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl is an all-butyl bead that seals effectively for mechanically-fastened glass. Foam-core butyl has a cellular foam center that provides rebound compression for urethane windshield installation, where the foam fills voids as the glass settles during cure. Do not substitute one for the other in windshield applications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes solid butyl work in both hot and cold weather?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy solid butyl is formulated for all-weather use. In cold temperatures it stiffens slightly but remains workable with light warming. In hot weather it becomes softer, which aids conformability but requires care not to stretch or distort the bead during placement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eShould I use boxed or bulk solid butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eIndividually boxed (ME625, ME825, ME925) is ideal for mobile installers — each box is a clean, single-application length ready to use on the job. Bulk packs (ME615S, ME815S, ME915S) offer a longer roll at lower cost per foot, better value for shops doing high-volume work where material efficiency matters more than per-job convenience.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44394664853719,"sku":"ME925","price":11.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/41uMd0QNYJL._SL1200_19e7df8a-55d5-473d-a513-06ec49c7bde4.jpg?v=1705088090"},{"product_id":"marcy-foam-tape","title":"Marcy Setting Block Foam Tape — 1\/4\" × 1\/4\" × 18ft | High Density | ME6494","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME6494 high-density foam tape prevents glass from sinking, reduces road noise, and delivers a professional flush finish on auto glass installations. Single-sided adhesive bonds to the vehicle body, allowing post-placement adjustment of the glass before the urethane sets. The high-density foam maintains its 1\/4\" profile under glass load — it won't compress flat and let the glass settle during cure. Compatible with all urethane adhesive types. Flexible enough to follow contoured sills and round corners without buckling.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME6494\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1\/4\" (6.4mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1\/4\" (6.4mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 18ft per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive:\u003c\/strong\u003e Single-sided (body side)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e High\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Setting blocks for auto glass installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply to the sill area of the vehicle opening before glass installation. The foam tape acts as a setting block, maintaining the correct glass height while urethane cures. Single-sided adhesive keeps the glass free to reposition if needed before the urethane sets. Cut to length with scissors or a razor blade.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat does setting block foam tape do?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSetting block foam tape sits between the bottom edge of the glass and the vehicle body. Its primary purpose is to hold the glass at the correct installation height so it doesn't sink under its own weight before the urethane cures. Without setting blocks, heavy glass can settle unevenly during cure, causing fitment and leak problems. High-density foam maintains its height under load throughout the cure period.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy is the adhesive only on one side?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe single-sided adhesive bonds to the car body but leaves the glass free to be positioned and adjusted. If the tape adhered to both surfaces, any glass repositioning after placement would tear the tape. The glass rests on top of the foam profile — held by its weight and eventually by the curing urethane — while the foam maintains consistent height underneath.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 1\/4\" height vs. 5\/16\" height foam tape?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 1\/4\" height (ME6494) is the standard for most passenger vehicles with typical glass-to-body clearances. The 5\/16\" height (ME6495) is used when a taller setting block is needed — for vehicles with deeper channels, thicker glass edges, or when the OEM installation procedure specifies a taller block. Match the height to the gap between the glass bottom edge and the pinch weld with the glass in the seated position.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow much foam tape does a typical installation use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eMost installations use two to four short sections placed along the bottom sill — typically 3–8 inches each for a total of 8–20 inches per installation. At 18 feet per roll, one ME6494 provides enough tape for many vehicles. Cut strips to length with scissors or a razor blade.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs this tape compatible with all urethane adhesives?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — ME6494 is compatible with all standard urethane adhesives used in automotive glass installation. The foam does not react with or inhibit urethane curing. It works across all OEM-grade, extended-cure, and fast-cure urethane systems.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"ME6494   1\/4\" X  1\/4\" X 18'","offer_id":44420565172439,"sku":"ME6494","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/Screenshot2024-07-08at3.58.38PM.png?v=1720479535"},{"product_id":"foam-tape-5-16-1-4-x-18-single-sided-high-density","title":"Marcy Setting Block Foam Tape — 5\/16\" × 1\/4\" × 18ft | High Density | ME6495","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME6495 high-density foam tape in the taller 5\/16\" profile — for auto glass installations where a higher setting block is needed to achieve the correct glass-to-body height. Single-sided adhesive bonds to the vehicle body, leaving the glass free to reposition before the urethane sets. High-density foam maintains its 5\/16\" height under glass load throughout the cure period. Compatible with all urethane adhesive types. Flexible enough to follow contoured sills and round corners without buckling.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME6495\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 5\/16\" (7.9mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1\/4\" (6.4mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 18ft per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive:\u003c\/strong\u003e Single-sided (body side)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e High\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Setting blocks for auto glass installation requiring taller block height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply to the sill area of the vehicle opening before glass installation. Use the 5\/16\" profile when the OEM procedure or vehicle's channel depth requires a taller setting block than the standard 1\/4\". Single-sided adhesive keeps the glass free to reposition if needed. Cut to length with scissors or a razor blade.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat does setting block foam tape do?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSetting block foam tape sits between the bottom edge of the glass and the vehicle body. Its primary purpose is to hold the glass at the correct installation height so it doesn't sink under its own weight before the urethane cures. Without setting blocks, heavy glass can settle unevenly during cure, causing fitment and leak problems. High-density foam maintains its height under load throughout the cure period.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 5\/16\" height instead of 1\/4\"?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 5\/16\" profile (ME6495) is used when the vehicle's glass channel depth, pinch weld geometry, or OEM installation procedure requires a taller setting block than the standard 1\/4\" (ME6494). Common applications include vehicles with deeper channels or thicker glass edge profiles where the 1\/4\" block doesn't bring the glass to the correct height. When in doubt, measure the gap between the glass bottom edge and the pinch weld in the seated position.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy is the adhesive only on one side?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe single-sided adhesive bonds to the car body but leaves the glass free to be positioned and adjusted. If the tape adhered to both surfaces, any glass repositioning after placement would tear the tape. The glass rests on top of the foam profile — held by its weight and eventually by the curing urethane — while the foam maintains consistent height underneath.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow much foam tape does a typical installation use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eMost installations use two to four short sections placed along the bottom sill — typically 3–8 inches each for a total of 8–20 inches per installation. At 18 feet per roll, one ME6495 provides enough tape for many vehicles. Cut strips to length with scissors or a razor blade.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs this tape compatible with all urethane adhesives?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — ME6495 is compatible with all standard urethane adhesives used in automotive glass installation. The foam does not react with or inhibit urethane curing. It works across all OEM-grade, extended-cure, and fast-cure urethane systems.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":45395800162519,"sku":"ME6495","price":9.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/Screenshot2024-07-08at3.58.38PM_e1568e41-c343-484f-b308-4702c9cdbf23.png?v=1720479551"},{"product_id":"me615s-marcy-solid-core-butyl-tape-round-1-4-x-15ft-bulk","title":"Marcy Solid-Core Butyl Tape — 1\/4\" × 15ft | Bulk Pack | ME615S","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME615S solid-core butyl tape in a 15-foot bulk roll — the 1\/4\" round profile for shops doing high-volume mechanically-fastened glass work where cost per foot matters. Same all-weather solid butyl formula as the individually boxed ME625, in a longer roll with a lower cost per foot. Suitable for sealing mechanically-fastened side and back glass, re-adhering door vapor barriers, and general automotive sealing tasks. Made in the USA. \u003cstrong\u003eNot intended for windshield installation — use foam-core butyl (ME612C or ME810B) for windshield applications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME615S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/4\" (6.4mm) round × 15ft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e Solid-core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Bulk roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mechanically-fastened side and back glass, door vapor barriers, general automotive sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply along the glass channel or frame opening before pressing the glass into position. Cut to length as needed. For mechanically-fastened side, rear, and quarter glass, door poly vapor barrier re-adhesion, and general body sealing tasks. Do not use for urethane windshield installations.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is solid-core butyl used for?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl seals mechanically-fastened glass — side windows, vent glass, sliding rear windows, and quarter glass where fasteners hold position. Also used for door poly vapor barrier re-adhesion and general body sealing. It is not the correct product for urethane-bonded windshield installation — use foam-core butyl for those applications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between the bulk ME615S and the boxed ME625?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eBoth contain the same 1\/4\" solid-core butyl formula. ME625 is individually boxed in a pre-cut 10-foot single-application length — ideal for mobile installers who want clean, ready-to-use tape on the job. ME615S is a 15-foot bulk roll at a lower cost per foot — better suited to shop environments doing multiple installations where roll management is practical and material cost per job matters.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 1\/4\" vs. 5\/16\" vs. 3\/8\" solid butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 1\/4\" profile (ME615S\/ME625) handles the majority of standard applications and is the most commonly used diameter. Use 5\/16\" (ME815S\/ME825) or 3\/8\" (ME915S\/ME925) when the channel or gap is wider and a fuller bead is needed to seal properly. Match the profile to the gap width in the seated glass position.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes solid butyl work in both hot and cold weather?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Marcy solid butyl is formulated for all-weather use. In cold temperatures it stiffens slightly — warm slightly before application for better conformability. In hot weather it's softer and more pliable, aiding application but requiring care not to stretch the bead during placement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between solid-core and foam-core butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl is an all-butyl bead suited for mechanically-fastened glass and sealing tasks. Foam-core has a cellular foam center that compresses and rebounds — required for urethane windshield installation where the foam fills settling voids during cure. Do not substitute one for the other in windshield applications.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46410210836695,"sku":"ME615S","price":9.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/marcy-butyl-tape-e0dd5321-2_16dea319-fa6a-4ce7-a7c4-414e759451ff.webp?v=1750020933"},{"product_id":"me815s-marcy-solid-core-butyl-tape-5-16-x-15ft-round-bulk","title":"Marcy Solid-Core Butyl Tape — 5\/16\" × 15ft | Bulk Pack | ME815S","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME815S solid-core butyl tape in a 15-foot bulk roll — the 5\/16\" round profile for shops doing high-volume mechanically-fastened glass work where a medium-diameter bead is needed. Same all-weather solid butyl formula as the individually boxed ME825, in a longer roll at a lower cost per foot. For applications where the standard 1\/4\" diameter is too narrow to seal the channel completely. Made in the USA. \u003cstrong\u003eNot intended for windshield installation — use foam-core butyl (ME612C or ME810B) for windshield applications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME815S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5\/16\" (7.9mm) round × 15ft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e Solid-core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Bulk roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mechanically-fastened side and back glass, general automotive sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply along the glass channel or frame opening before pressing the glass into position. Cut to length as needed. The 5\/16\" profile fills wider channels than the standard 1\/4\" — common on mid-size trucks, vans, and SUVs. Do not use for urethane windshield installations.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is solid-core butyl used for?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl seals mechanically-fastened glass — side windows, vent glass, sliding rear windows, and quarter glass where fasteners hold position. Also used for door poly vapor barrier re-adhesion and general body sealing. It is not the correct product for urethane-bonded windshield installation — use foam-core butyl for those applications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between the bulk ME815S and the boxed ME825?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eBoth contain the same 5\/16\" solid-core butyl formula. ME825 is individually boxed in a pre-cut 10-foot single-application length — ideal for mobile installers. ME815S is a 15-foot bulk roll at a lower cost per foot — better suited to shop environments doing multiple installations where material cost per job is the priority.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 5\/16\" instead of 1\/4\" or 3\/8\"?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eUse 5\/16\" when the channel gap is too wide for the 1\/4\" to fill completely, but the 3\/8\" would make glass positioning difficult. The 5\/16\" is the middle profile — common on mid-size trucks, vans, and SUVs with moderately wider channels than standard passenger cars. Match the profile to the gap width in the seated glass position.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes solid butyl work in both hot and cold weather?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Marcy solid butyl is formulated for all-weather use. Warm slightly in cold conditions for better conformability. In hot weather, handle carefully to avoid stretching the bead during placement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between solid-core and foam-core butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core is an all-butyl bead suited for mechanically-fastened glass and general sealing. Foam-core has a foam center that rebounds to fill voids — required for urethane windshield installation. Do not substitute one for the other in windshield applications.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46410306486487,"sku":"ME815S","price":10.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/marcy-butyl-tape-e0dd5321-2_685b4ec2-b7e3-4775-87c5-87661344dabd.webp?v=1750020900"},{"product_id":"me915s-marcy-solid-core-butyl-tape-3-8-x-15ft-round-bulk","title":"Marcy Solid-Core Butyl Tape — 3\/8\" × 15ft | Bulk Pack | ME915S","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME915S solid-core butyl tape in a 15-foot bulk roll — the 3\/8\" round profile for shops doing high-volume work on larger vehicle channels and commercial applications requiring a heavy butyl bead. Same all-weather solid butyl formula as the individually boxed ME925, in a longer roll at a lower cost per foot. The widest standard solid butyl profile, filling gaps that smaller diameters can't seal completely. Made in the USA. \u003cstrong\u003eNot intended for windshield installation — use foam-core butyl (ME612C or ME810B) for windshield applications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME915S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8\" (9.5mm) round × 15ft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e Solid-core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Bulk roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mechanically-fastened glass with wide channels, commercial vehicle sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply along the glass channel or frame opening before pressing the glass into position. Cut to length as needed. The 3\/8\" profile fills large channel gaps on full-size trucks, vans, and commercial vehicles where smaller diameters would leave voids. Do not use for urethane windshield installations.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is solid-core butyl used for?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl seals mechanically-fastened glass — side windows, vent glass, sliding rear windows, and quarter glass where fasteners hold position. Also used for general automotive body sealing. It is not the correct product for urethane-bonded windshield installation — use foam-core butyl for those applications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between the bulk ME915S and the boxed ME925?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eBoth contain the same 3\/8\" solid-core butyl formula. ME925 is individually boxed in a pre-cut 10-foot single-application length — ideal for mobile installers. ME915S is a 15-foot bulk roll at a lower cost per foot — better suited to shops doing high-volume work where material efficiency is the priority.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 3\/8\" instead of 1\/4\" or 5\/16\"?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 3\/8\" profile (ME915S\/ME925) is used when the channel gap is large enough that smaller diameters don't fill it completely. Most common on larger trucks, full-size vans, and commercial vehicles with wide glass channels. When in doubt, verify the channel width with the glass in the seated position — the butyl should compress to fill the gap without excessive resistance.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes solid butyl work in both hot and cold weather?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Marcy solid butyl is formulated for all-weather use. Warm slightly in cold conditions for better conformability. In hot weather, handle carefully to avoid stretching the bead during placement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between solid-core and foam-core butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core is an all-butyl bead suited for mechanically-fastened glass and general sealing. Foam-core has a foam center that rebounds to fill settling voids — required for urethane windshield installation. Do not substitute one for the other in windshield applications.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46410372808919,"sku":"ME915S","price":12.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/marcy-butyl-tape-e0dd5321-2.webp?v=1750020865"},{"product_id":"me0076-marcy-molding-retention-tape-1-5-x-108ft-blue","title":"Marcy Molding Retention Tape — 1.5\" × 108ft | Blue | ME0076","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME0076 molding retention tape in blue holds exterior mouldings firmly in position while urethane cures, then peels away cleanly without lifting paint or leaving adhesive residue. The 1.5\" width covers most exterior moulding profiles in one strip. Blue gives technicians a clear visual reference to confirm full moulding coverage before the vehicle leaves the bay — easy to see on any paint color. Printed \"REMOVE WITHIN 24 HOURS\" along the length to prevent customer comebacks from delayed removal. Perforated every foot for easy hand-tearing without scissors.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME0076\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1.5\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 108ft per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Exterior moulding retention during urethane cure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply directly over the installed moulding to hold it in position while the urethane adhesive beneath fully cures. Remove within 24 hours of application. Compatible with factory paint, clear coat, and most vinyl and wrap finishes. Perforated every foot for clean hand-tearing to any length.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow long should I leave the retention tape on?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eRemove within 24 hours — this reminder is printed directly on the tape to prevent customer callbacks. Leaving it longer increases adhesive bond strength, especially in heat and direct sun, and can make clean removal difficult or cause paint damage. In hot conditions, err toward earlier removal.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this tape pull paint or leave residue?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eMarcy retention tape is formulated specifically for automotive exterior painted surfaces and is designed to release cleanly when removed within the 24-hour window. It works on factory paint, clear coat, and most films and wraps. Adhesive bond strength increases with heat and time, so prompt removal is the key to residue-free release.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat's the difference between clear, blue, and orange?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eClear (ME0073), blue (ME0076), and orange (ME0072) all perform identically — the difference is visual only. Blue is the most popular shop color — visible against most paint finishes, making it easy to confirm coverage and find tape edges when removing. Clear is preferred when the vehicle may be seen by the customer before removal. Orange gives the highest visibility contrast on lighter vehicles.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow much tape does a typical moulding job use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eA typical windshield moulding installation uses 8–14 feet depending on glass size and moulding run length. At 108 feet per roll, one roll covers approximately 8–12 complete windshield jobs. Door panel or quarter moulding strips use 3–6 feet per panel.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs this tape UV and weather resistant?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Marcy retention tape is all-weather and UV-resistant, designed to hold through rain, heat, cold, and direct sun during the urethane cure period. Even if the vehicle is driven or sits outside before you return to remove the tape, it maintains adhesion and peels cleanly within the 24-hour window.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46412452102359,"sku":"ME0076","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/GTME0076_MarcyBlueWindshieldAdhesiveTape_Angle1_530x_2x_1.webp?v=1756321105"},{"product_id":"me0072-marcy-molding-retention-tape-1-5-x-108ft-orange","title":"Marcy Molding Retention Tape — 1.5\" × 108ft | Orange | ME0072","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME0072 molding retention tape in orange holds exterior mouldings firmly in position while urethane cures, then peels away cleanly without lifting paint or leaving adhesive residue. The 1.5\" width covers most exterior moulding profiles in one strip. Orange is the most visible color in the Marcy lineup — easy to spot on any paint color and simple to confirm full moulding coverage at a glance. Printed \"REMOVE WITHIN 24 HOURS\" along the length to prevent customer comebacks from delayed removal. Perforated every foot for easy hand-tearing without scissors.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME0072\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1.5\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 108ft per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Orange\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Exterior moulding retention during urethane cure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply directly over the installed moulding to hold it in position while the urethane adhesive beneath fully cures. Remove within 24 hours of application. Compatible with factory paint, clear coat, and most vinyl and wrap finishes. Perforated every foot for clean hand-tearing to any length.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow long should I leave the retention tape on?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eRemove within 24 hours — this reminder is printed directly on the tape to prevent customer callbacks. Leaving it longer increases adhesive bond strength, especially in heat and direct sun, and can make clean removal difficult or cause paint damage. In hot conditions, err toward earlier removal.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this tape pull paint or leave residue?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eMarcy retention tape is formulated specifically for automotive exterior painted surfaces and is designed to release cleanly when removed within the 24-hour window. It works on factory paint, clear coat, and most films and wraps. Adhesive bond strength increases with heat and time, so prompt removal is the key to residue-free release.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat's the difference between clear, blue, and orange?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eClear (ME0073), blue (ME0076), and orange (ME0072) all perform identically — the difference is visual only. Orange provides the highest contrast visibility and is easiest to see and remove cleanly, especially in poor lighting. Blue is the most common shop color. Clear is the least visible on the vehicle, preferred when the customer may see the car before tape removal.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow much tape does a typical moulding job use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eA typical windshield moulding installation uses 8–14 feet depending on glass size and moulding run length. At 108 feet per roll, one roll covers approximately 8–12 complete windshield jobs. Door panel or quarter moulding strips use 3–6 feet per panel.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs this tape UV and weather resistant?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Marcy retention tape is all-weather and UV-resistant, designed to hold through rain, heat, cold, and direct sun during the urethane cure period. Even if the vehicle is driven or sits outside before you return to remove the tape, it maintains adhesion and peels cleanly within the 24-hour window.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46412737839319,"sku":"ME0072","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/GTME0072_MarcyOrangeWindshieldAdhesiveTape_Angle1_530x_2x_1.webp?v=1756321045"},{"product_id":"me1008-200-marcy-masking-tape-2-x-60yds-black","title":"Marcy Automotive Masking Tape — 2\" × 60 yds | Black | ME1008-200","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME1008-200 automotive masking tape in black — the professional-grade tape for protecting painted surfaces during windshield replacement, body work, and moulding installation. Peels cleanly without leaving residue and resists outdoor weathering including rain, heat, cold, and UV. The 2\" width covers pinch welds, trim edges, and body panels efficiently in one pass. Black color blends naturally on dark vehicles and in applications where low visual contrast is preferred before tape removal. Tears by hand — no scissors needed.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME1008-200\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 60 yards per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Surface masking and paint protection during auto glass and body work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply to painted surfaces, trim, and body panels before glass removal or installation to protect against adhesive drips, urethane contamination, and tool contact. Tear by hand to length. Remove promptly after work is complete — extended exposure to heat and sun increases adhesive bond strength and can make removal more difficult.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs this tape safe for automotive paint?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy masking tape is formulated for automotive painted surfaces and is designed to peel cleanly without lifting clear coat or leaving adhesive residue when removed promptly. As with all masking tapes, remove it the same day it's applied; extended exposure to direct sun and heat increases adhesive bond strength and can make clean removal more difficult.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat does \"weather resistant\" mean for a masking tape?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eWeather-resistant means the tape maintains its adhesion and won't curl, blow off, or saturate in rain, heat, cold, or direct sunlight during a typical workday. For auto glass jobs where vehicles sit outside during urethane cure, the tape stays in place and peels cleanly when you're ready to remove it. It is not intended for long-term outdoor exposure — remove it the same day.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat's the difference between black and blue Marcy masking tape?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eME1008-200 (black) and ME1007-200 (blue) perform identically — the difference is color. Black is preferred when working on dark vehicles where blue would contrast visually, or when a low-visibility masking appearance is preferred for customer-facing work. Blue is the standard shop choice and is easier to see when confirming full coverage on most vehicle colors.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan this tape be torn by hand?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy masking tape tears cleanly by hand without scissors. For mobile installers and busy shop work, this makes applying and cutting lengths fast without stopping to find a blade. Tear from the roll edge for a clean, straight tear.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow much masking tape does a typical windshield job use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eA typical windshield masking job uses 10–20 feet of tape to protect the pinch weld, cowl, and surrounding painted panels. At 60 yards (180 feet) per roll, one ME1008-200 covers approximately 9–18 complete windshield jobs. High-volume shops typically go through one roll every few days.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46419333447895,"sku":"","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/Masking-tape-blue-black-20ff0183.webp?v=1749948818"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/collections\/tapes-adhesives.svg?v=1778908133","url":"https:\/\/southmountainsupply.com\/collections\/tapes-adhesives.oembed","provider":"South Mountain Supply ","version":"1.0","type":"link"}