{"title":"Marcy","description":"South Mountain Supply carries the Marcy line of auto glass supplies, including rain sensor pads and accessories designed for professional windshield installation. Marcy products deliver the reliability and consistency that auto glass technicians depend on every day. Trusted by glass shops across North America since 1992.","products":[{"product_id":"fb375p","title":"Marcy Foam Windshield Setting \u0026amp; Spacer Blocks 3\/8\" x 1\/4\" x 1\" | 288 Blocks | ME7496","description":"\u003cp\u003e✓ In stock\u003c\/p\u003e\n\n\u003cp\u003eThese Marcy foam windshield setting and spacer blocks provide a flexible, compressible fit for glass positioning during urethane installations. Each block measures 3\/8\" × 1\/4\" × 1\" and features a self-adhesive backing for hands-free placement on the pinchweld. Sold in packs of 288 blocks (4 pads), these foam spacers are a shop staple for achieving consistent, repeatable setting heights across a wide range of vehicle makes and models — particularly useful where a taller setting height is required.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Windshield Setting \/ Spacer Block\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Foam with Self-Adhesive Backing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3\/8\" × 1\/4\" × 1\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 288 Blocks (4 Pads)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal — Windshield \/ Pinchweld\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal — Compatible with most automotive windshield installations requiring a 3\/8\" setting height\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCross-Reference Numbers\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarcy Part#:\u003c\/strong\u003e ME7496\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSMS Part#:\u003c\/strong\u003e ME7496\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between foam and nylon setting blocks?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eFoam blocks are slightly compressible, which can help accommodate minor pinchweld irregularities and provide a small amount of vibration dampening. Nylon blocks are rigid and maintain a precise, fixed height. Foam blocks are commonly used in high-volume auto glass shops for their versatility; nylon blocks are preferred when a specific OEM setting height must be maintained exactly.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow many blocks come in each pack?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEach pack contains 288 individual foam blocks supplied on 4 pads. This format makes it easy to dispense individual blocks during installation and keep the remainder clean and organized on the pad between jobs.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat does the self-adhesive backing do?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe self-adhesive backing holds each foam block in place on the pinchweld flange while you position and lower the windshield glass. This prevents the block from shifting during placement, reducing the need for a second technician to hold blocks in position during installation.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat setting height do these blocks provide, and are other sizes available?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThese blocks provide a 3\/8\" setting height — the tallest in this foam block series. South Mountain Supply also carries 1\/4\" foam setting blocks (ME7494) and 5\/16\" foam setting blocks (ME7495) for applications requiring a lower setting height. Select the size that matches your vehicle's pinchweld depth and urethane bead profile.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eAre foam setting blocks removed after the urethane cures?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eIn most urethane windshield installations, setting blocks remain permanently in place once the adhesive cures — they become encapsulated within the urethane bond. Attempting to remove them after cure can compromise the seal. Always follow the adhesive manufacturer's installation instructions for your specific application.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":43790809727191,"sku":"ME7496","price":27.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/products\/FB250P_12459.jpg?v=1681936876"},{"product_id":"auto-glass-height-setting-blocks","title":"Marcy Foam Windshield Setting \u0026 Spacer Blocks 1\/4\" x 1\/4\" x 1\" | 288 Blocks | ME7494","description":"\u003cp\u003e✓ In stock\u003c\/p\u003e\n\n\u003cp\u003eThese Marcy foam windshield setting and spacer blocks provide a flexible, compressible solution for glass positioning during urethane installations. Each block measures 1\/4\" × 1\/4\" × 1\" and features a self-adhesive backing for hands-free placement on the pinchweld. Sold in packs of 288 blocks (4 pads), these foam spacers are widely used in auto glass shops for consistent, repeatable setting heights across a variety of vehicle makes and models.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Windshield Setting \/ Spacer Block\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Foam with Self-Adhesive Backing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1\/4\" × 1\/4\" × 1\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 288 Blocks (4 Pads)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal — Windshield \/ Pinchweld\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal — Compatible with most automotive windshield installations requiring a 1\/4\" setting height\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCross-Reference Numbers\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarcy Part#:\u003c\/strong\u003e ME7494\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSMS Part#:\u003c\/strong\u003e ME7494\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between foam and nylon setting blocks?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eFoam blocks are slightly compressible, which can help accommodate minor pinchweld irregularities and provide a small amount of vibration dampening. Nylon blocks are rigid and maintain a precise, fixed height. Foam blocks are commonly used in high-volume auto glass shops for their versatility; nylon blocks are preferred when a specific OEM setting height must be maintained exactly.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow many blocks come in each pack?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEach pack contains 288 individual foam blocks supplied on 4 pads. This format makes it easy to dispense individual blocks during installation and keep the remainder clean and organized on the pad between jobs.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat does the self-adhesive backing do?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe self-adhesive backing holds each foam block in place on the pinchweld flange while you position and lower the windshield glass. This prevents the block from shifting during placement, reducing the need for a second technician to hold blocks in position during installation.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat setting height do these blocks provide, and are other sizes available?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThese blocks provide a 1\/4\" setting height. South Mountain Supply also carries 5\/16\" foam setting blocks (ME7495) and 3\/8\" foam setting blocks (ME7496) for applications requiring a taller setting height. Select the size that matches your vehicle's pinchweld depth and urethane bead profile.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eAre foam setting blocks removed after the urethane cures?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eIn most urethane windshield installations, setting blocks remain permanently in place once the adhesive cures — they become encapsulated within the urethane bond. Attempting to remove them after cure can compromise the seal. Always follow the adhesive manufacturer's installation instructions for your specific application.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"ME 7494    1\/4\" X 1\/4\" X  1\"  (288 Blocks)","offer_id":44396543934679,"sku":"ME7494","price":25.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/FB250P_12459.jpg?v=1745970128"},{"product_id":"foam-core-butyl-individually-boxed","title":"Marcy Foam-Core Butyl Tape — 6mm × 12ft | Individually Boxed | ME612C","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME612C foam-core butyl tape in a single-application box — the correct butyl for windshield installation where foam-core is required. The foam center delivers compression deflection and rebound that solid butyl cannot match, creating a leak-proof seal even when the glass settles unevenly during cure. The 6mm profile is the standard width for most passenger car and light truck windshield applications. Many Ford, Lincoln, and Mercury OE installation procedures specifically require foam-core butyl — ME612C is the go-to product for those platforms. Individually boxed and ready to use on the job.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME612C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6mm × 12ft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e Foam-core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Individually boxed (single-application)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Windshield and fixed-glass installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply to the pinch weld or vehicle channel before setting the glass. Designed for windshield and urethane-bonded fixed-glass installations where foam-core butyl is required by OEM or quality-standard procedures. Not intended for mechanically-fastened glass — use solid-core butyl (ME615S, ME815S, ME915S) for those applications.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is foam-core butyl and why is it different from solid-core?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eFoam-core butyl has a cellular foam center wrapped in butyl. The foam compresses as the glass is set and rebounds to fill gaps and voids, creating a conforming, leak-free seal. Solid-core butyl seals well but doesn't have the same rebound. Ford, Lincoln, Mercury OE procedures and many professional installation quality standards require foam-core because of this superior void-filling and leak-resistance characteristic.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhich vehicles require foam-core butyl by OEM spec?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eMany Ford, Lincoln, and Mercury vehicles specifically call out foam-core butyl in their OEM windshield installation procedures. When servicing a Ford platform, default to foam-core. For other makes, refer to the vehicle-specific procedure — both foam-core and solid-core are used industry-wide, and using the wrong type can affect seal quality.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 6mm vs. 8mm foam-core butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 6mm profile (ME612C) suits the majority of standard passenger cars and light trucks with typical pinch weld channel dimensions. The 8mm profile (ME810B) is used when a wider bead is specified or when the channel is larger than standard. Match the profile to the OEM procedure or pinch weld dimension — 6mm is the most common choice across most vehicle platforms.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes foam-core butyl work in cold weather?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Marcy foam-core butyl remains workable across a wide temperature range. In temperatures below 40°F, warm the tape slightly before application to improve conformability and adhesion to the pinch weld. Avoid overheating — excessive heat will deform the foam core before the glass is set.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy is individually boxed butyl useful for mobile installers?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe Butyl-in-a-Box format keeps the tape clean and protected from dust, UV, and contamination until needed. For mobile installers working from a van or truck, it eliminates the handling issues of unwrapped bulk rolls and simplifies per-job material tracking. Each box contains a single-application length — open, use, done.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44338511184087,"sku":"ME612C","price":9.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/butyl_page_img.jpg?v=1702924533"},{"product_id":"copy-of-foam-core-butyl-individually-boxed","title":"Marcy Solid-Core Butyl Tape — 1\/4\" × 10ft | Individually Boxed | ME625","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME625 solid-core butyl tape in a single-application box — the all-purpose butyl for sealing mechanically-fastened side and back glass, re-adhering door vapor barriers, and everyday automotive sealing tasks. The 1\/4\" round profile is the most common solid butyl diameter in the auto glass trade, handling the majority of channel widths and gap sizes. Works reliably in hot and cold weather. Individually boxed for the mobile installer — no cutting, no re-wrapping. \u003cstrong\u003eNot intended for windshield installation — use foam-core butyl (ME612C or ME810B) for windshield applications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME625\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/4\" (6.4mm) round × 10ft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e Solid-core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Individually boxed (single-application)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mechanically-fastened side and back glass, door vapor barriers, general automotive sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply along the glass channel or frame opening before pressing the glass into position. For mechanically-fastened side, rear, and quarter glass on trucks, vans, and SUVs, and for door vapor barrier re-adhesion and general body sealing tasks. Do not use for urethane windshield installations — use foam-core butyl for those.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is solid-core butyl used for?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl is the correct sealant for mechanically-fastened glass — side windows, vent glass, sliding rear windows, and quarter glass on trucks and SUVs where fasteners (not urethane) hold the glass in position. It is also commonly used for re-adhering door poly vapor barriers and for general body sealing where a flexible, weather-resistant bead is needed. It is not the correct product for urethane-bonded windshield installation — use foam-core butyl for those applications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between solid-core and foam-core butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl is an all-butyl bead. It conforms to the channel and seals effectively, but does not have the rebound compression of foam-core. Foam-core is designed specifically for windshield installation, where the glass settles during cure and voids must be filled by the foam rebound. For mechanically-fastened glass where fasteners control position, solid-core is the correct and more economical choice.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 1\/4\" vs. 5\/16\" vs. 3\/8\" solid butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe three profiles correspond to different gap sizes. The 1\/4\" (ME625\/ME615S) handles the majority of standard applications and is the most commonly used diameter. Use 5\/16\" (ME825\/ME815S) or 3\/8\" (ME925\/ME915S) when the channel or gap is wider and a fuller bead is needed to seal properly. Too small leaves voids; too large makes glass positioning difficult.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes solid butyl work in both hot and cold weather?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy solid butyl is formulated for all-weather use. In cold temperatures it stiffens but remains workable — warming slightly in your hands or with low heat improves conformability. In hot weather it becomes softer and more pliable, which can ease application but requires care not to stretch or distort the bead during placement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eShould I use boxed or bulk solid butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eIndividually boxed (ME625, ME825, ME925) is ideal for mobile installers — each box is a clean, single-application length ready to use on the job. Bulk packs (ME615S, ME815S, ME915S) provide a longer roll at a lower cost per foot, making them better value for shops doing high-volume work where material efficiency matters more than per-job convenience.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44338521309399,"sku":"ME625","price":10.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/41uMd0QNYJL._SL1200.jpg?v=1705087874"},{"product_id":"rain-sensor-pads","title":"Marcy Rain Sensor Pad — 34 × 25mm | MSP2685","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy MSP2685 rain sensor pad in 34×25mm — the silicone interface pad that couples the rain sensor to the inside surface of a replacement windshield. Made from Marcy's fingerprint-resistant silicone using patented clamshell molds that produce a consistently shaped, thicker pad with complete glass contact and no air pockets. The clamshell packaging keeps pads free from contamination until the moment of application. Available in single or 5-pack quantities. Made in the USA.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e MSP2685\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 34 × 25mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Rectangular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fingerprint-resistant silicone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Clamshell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAvailable Quantities:\u003c\/strong\u003e 1-pack, 5-pack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Rain sensor to windshield optical interface after glass replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eAfter windshield installation, position the new pad between the rain sensor lens and the inside glass surface before remounting the sensor. Remove from clamshell packaging immediately before application to avoid contamination. Refer to the \u003ca href=\"https:\/\/marcyadhesives.com\/images\/pdf\/Marcy-Sensor-Pads-NAmerican-Interchange-Chart.pdf\"\u003eN. America Interchange Chart\u003c\/a\u003e or \u003ca href=\"https:\/\/marcyadhesives.com\/images\/pdf\/Marcy-Sensor-Pads-Europe-Interchange-Chart.pdf\"\u003eEurope Interchange Chart\u003c\/a\u003e to confirm this is the correct size for your vehicle.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy does the rain sensor need a new pad after windshield replacement?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe rain sensor maintains optical contact with the inside surface of the windshield glass to detect water droplets. The silicone pad fills the micro-gap between the sensor lens and the glass, eliminating air (which causes optical interference) and ensuring accurate sensor detection. The original pad bonds to the old glass and cannot be reused — a new pad is required with every windshield replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow do I know which pad size to use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003ePad size is matched to the rain sensor module on the vehicle, not to the windshield itself. Download the Marcy N. America or Europe Interchange Chart (links above) and cross-reference by vehicle year, make, and model to find the correct MSP part number. The pad should fully cover the sensor lens footprint without significant overhang on any side.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy is fingerprint-resistant silicone important?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eStandard silicone picks up skin oils and dust during handling, creating micro-voids and optical inconsistencies between the sensor and glass. These voids can cause false rain detection, missed detection, or sensor error codes. Marcy's fingerprint-resistant formula minimizes contamination transfer during application, maintaining a clean, full-contact optical interface.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the advantage of clamshell packaging?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eTraditional rain sensor pads come in bags where the silicone surface picks up lint and dust during storage. Marcy's clamshell holds the pad in a clean, closed case until the moment of installation. It also eliminates fumbling with a bag when you have urethane on your gloves — open the shell, remove the pad, apply, done.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat happens if the wrong size pad is used?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eIf the pad is too small, air gaps remain at the pad edge under the sensor lens, causing inconsistent detection or sensor error codes. If the pad is too large, it may prevent the sensor from seating flush against the glass or create optical distortion at the lens perimeter. Use the interchange chart to match the correct pad to the vehicle's sensor.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Single","offer_id":44449216790743,"sku":"MSP2685","price":6.0,"currency_code":"USD","in_stock":true},{"title":"5 Pack","offer_id":44449111277783,"sku":"MSP2685-5","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/Screenshot2023-12-18at4.23.51PM.png?v=1702946345"},{"product_id":"quickcure-rain-sensor-gel","title":"Marcy QuickCure Rain Sensor Gel — 12ml | Multi-Use | QC12","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy QuickCure Rain Sensor Gel is the professional standard for bonding rain sensors to automotive glass. The 12ml QC12 is the multi-use size — enough for multiple sensor installations — with a sub-4-minute cure time that lets you complete the job and move on. Clean, odorless, and fully removable, QuickCure leaves no residue on the glass when the sensor is removed for warranty or replacement work.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e QC12\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 12ml\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Multi-use syringe\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCure Time:\u003c\/strong\u003e Under 4 minutes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with all Marcy rain sensor pad types (MSP series)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply a small amount of QuickCure gel to the rain sensor pad, position the sensor on the glass, and hold in place for 3–4 minutes until cured. Use the QCL leveler for hands-free positioning during the cure cycle. Use a fresh nozzle (QCN) for each session to prevent clogging between uses.\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eHow much gel does one installation use?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eA typical installation uses approximately 1–2ml of gel. The 12ml QC12 syringe provides roughly 6–12 applications depending on sensor size, making it the best value for shops doing multiple rain sensor installs.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eHow long does QuickCure gel take to cure?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eQuickCure gels in under 4 minutes at room temperature. Avoid moving the sensor during the cure window — use the QCL leveler to hold the sensor in place hands-free if needed.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eCan I remove the sensor after it's been bonded?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes. QuickCure is designed for clean removal — the gel peels away from the glass without leaving residue, making it safe for warranty replacements and sensor swaps. It is not a permanent adhesive.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat's the difference between QC12 and QC4?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eQC12 is the 12ml multi-use size, suitable for shops or technicians doing multiple installations. QC4 is a 4ml single-use size, ideal for occasional use or keeping one in the toolkit as a backup. Both use the same formula.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eHow do I prevent the nozzle from clogging between uses?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eNozzle clogging occurs when residual gel cures in the tip between sessions. After each use, replace the nozzle cap immediately. If a nozzle clogs, replace it with a fresh nozzle from the QCN 10-pack rather than trying to clear it. Do not store the syringe with a clogged nozzle in place.\u003c\/p\u003e\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44338584912087,"sku":"QC12","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/s-l1600-807794462.jpg?v=1702929189"},{"product_id":"marcy-masking-tape","title":"Professional Auto Glass Masking Tape 2\" x 60 yds (Blue) | Marcy ME1007-200 | Shop Supply","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME1007-200 automotive masking tape in blue — the professional-grade tape for protecting painted surfaces during windshield replacement, body work, and moulding installation. Peels cleanly without leaving residue and resists outdoor weathering including rain, heat, cold, and UV. The 2\" width covers pinch welds, trim edges, and body panels efficiently in one pass. Blue color gives technicians a clear visual reference to confirm surface coverage before work begins. Tears by hand — no scissors needed.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME1007-200\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 60 yards per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Surface masking and paint protection during auto glass and body work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply to painted surfaces, trim, and body panels before glass removal or installation to protect against adhesive drips, urethane contamination, and tool contact. Tear by hand to length. Remove promptly after work is complete — extended exposure to heat and sun increases adhesive bond strength and can make removal more difficult.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs this tape safe for automotive paint?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy masking tape is formulated for automotive painted surfaces and is designed to peel cleanly without lifting clear coat or leaving adhesive residue when removed promptly. As with all masking tapes, remove it the same day it's applied; extended exposure to direct sun and heat increases adhesive bond strength and can make clean removal more difficult.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat does \"weather resistant\" mean for a masking tape?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eWeather-resistant means the tape maintains its adhesion and won't curl, blow off, or saturate in rain, heat, cold, or direct sunlight during a typical workday. For auto glass jobs where vehicles sit outside during urethane cure, the tape stays in place and peels cleanly when you're ready to remove it. It is not intended for long-term outdoor exposure — remove it the same day.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat's the difference between blue and black Marcy masking tape?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eME1007-200 (blue) and ME1008-200 (black) perform identically — the difference is color. Blue is the standard shop color, highly visible against most paint finishes and easy to see when confirming full coverage. Black is preferred when working on very dark vehicles or when a low-visibility masking appearance is preferred for customer-facing work before the tape is removed.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan this tape be torn by hand?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy masking tape tears cleanly by hand without scissors. For mobile installers and busy shop work, this makes applying and cutting lengths fast without stopping to find a blade. Tear from the roll edge for a clean, straight tear.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow much masking tape does a typical windshield job use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eA typical windshield masking job uses 10–20 feet of tape to protect the pinch weld, cowl, and surrounding painted panels. At 60 yards (180 feet) per roll, one ME1007-200 covers approximately 9–18 complete windshield jobs. High-volume shops typically go through one roll every few days.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44338650710231,"sku":"ME1007-200","price":12.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/GTME0066_3x300OrangeMarcyTape_Angle1_grande_6720a9a9-15f8-4cbd-9e5c-63e5172478ba.webp?v=1702949646"},{"product_id":"molding-tapes","title":"Marcy Molding Retention Tape — 1.5\" × 108ft | Clear | ME0073","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME0073 molding retention tape holds exterior mouldings firmly in position while urethane cures, then peels away cleanly without lifting paint or leaving adhesive residue. The 1.5\" width covers most exterior moulding profiles in one strip. Clear color is the most neutral option — a good choice when the vehicle may be seen by the customer before tape removal. Printed \"REMOVE WITHIN 24 HOURS\" along the length to prevent customer comebacks from delayed removal. Perforated every foot for easy hand-tearing without scissors.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME0073\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1.5\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 108ft per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Exterior moulding retention during urethane cure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply directly over the installed moulding to hold it in position while the urethane adhesive beneath fully cures. Remove within 24 hours of application. Compatible with factory paint, clear coat, and most vinyl and wrap finishes. Perforated every foot for clean hand-tearing to any length.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow long should I leave the retention tape on?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eRemove within 24 hours — this reminder is printed directly on the tape to prevent customer callbacks. Leaving it longer increases adhesive bond strength, especially in heat and direct sun, and can make clean removal difficult or cause paint damage. In hot conditions, err toward earlier removal.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this tape pull paint or leave residue?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eMarcy retention tape is formulated specifically for automotive exterior painted surfaces and is designed to release cleanly when removed within the 24-hour window. It works on factory paint, clear coat, and most films and wraps. Adhesive bond strength increases with heat and time, so prompt removal is the key to residue-free release.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat's the difference between clear, blue, and orange?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eClear (ME0073), blue (ME0076), and orange (ME0072) all perform identically — the difference is visual only. Clear is least noticeable on the vehicle, preferred when the customer may see the car before tape removal. Blue and orange are easier for technicians to see when confirming full moulding coverage and when locating tape to remove it at the end of the job.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow much tape does a typical moulding job use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eA typical windshield moulding installation uses 8–14 feet depending on glass size and moulding run length. At 108 feet per roll, one roll covers approximately 8–12 complete windshield jobs. Door panel or quarter moulding strips use 3–6 feet per panel.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs this tape UV and weather resistant?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Marcy retention tape is all-weather and UV-resistant, designed to hold through rain, heat, cold, and direct sun during the urethane cure period. Even if the vehicle is driven or sits outside before you return to remove the tape, it maintains adhesion and peels cleanly within the 24-hour window.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44338655035607,"sku":"ME0073","price":6.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/GTME0072_MarcyClearWindshieldAdhesiveTape_Angle1_1024x1024_2x-2159706886.jpg?v=1702931625"},{"product_id":"wool-daubers","title":"HT5RWD - Marcy Premium Wool Daubers  3\/4\" round ball 5\" length \/ 100 pcs.","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHigh quality 100% wool dauber with 3\/4” diameter ball with 5” length stem for easy, clean use. Perfect for applying primer to the windshield. In order to prevent contamination, dip the dauber once into the primer. Once the primer has been applied to the glass, discard the dauber. Package includes 100 pieces in 3\/4 inch.\u003c\/span\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44338671288535,"sku":"HT5RWD","price":11.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/agwd-.75_530x_2x_87e27838-e591-46cb-8346-2e8a14d91b23.webp?v=1702932195"},{"product_id":"quickcure-rain-sensor-gel-1","title":"Marcy QuickCure Rain Sensor Gel — 4ml | QC4","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy QuickCure Rain Sensor Gel in the 4ml size — the right amount for a single rain sensor installation or occasional use. Same professional formula as the QC12: sub-4-minute cure, clean odorless application, and fully removable for warranty work. Compact enough to keep in a toolkit without worrying about gel degrading between uses.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e QC4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVolume:\u003c\/strong\u003e 4ml\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Single-use syringe\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCure Time:\u003c\/strong\u003e Under 4 minutes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Works with all Marcy rain sensor pad types (MSP series)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply a small amount of QuickCure gel to the rain sensor pad, position the sensor on the glass, and hold in place for 3–4 minutes until cured. Use the QCL leveler for hands-free positioning during the cure cycle. A typical installation uses 1–2ml, so the 4ml syringe covers one to two sensors.\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eIs QC4 the same formula as QC12?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes, QC4 and QC12 use identical gel formulas. The only difference is volume. QC4 is sized for single or occasional use; QC12 is the multi-use size for shops doing multiple installations.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eHow long does QuickCure gel take to cure?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eQuickCure gels in under 4 minutes at room temperature. Avoid moving the sensor during the cure window — the QCL leveler can hold the sensor hands-free during this period.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eCan I remove the sensor after bonding?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes. QuickCure is designed for clean removal — the gel peels away from the glass without leaving residue, making it safe for warranty replacements and sensor swaps.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eDo I need a new nozzle for each use?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eNozzles can clog if gel cures in the tip between sessions. For best results, use a fresh nozzle (from the QCN 10-pack) for each session. Replace the cap promptly after use to extend nozzle life.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat rain sensor pads work with QuickCure gel?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eQuickCure is compatible with all Marcy MSP-series rain sensor pads. Select the correct pad size for your sensor using the \u003ca href=\"https:\/\/marcyadhesives.com\/images\/pdf\/Marcy-Sensor-Pads-NAmerican-Interchange-Chart.pdf\"\u003eN. America Interchange Chart\u003c\/a\u003e or \u003ca href=\"https:\/\/marcyadhesives.com\/images\/pdf\/Marcy-Sensor-Pads-Europe-Interchange-Chart.pdf\"\u003eEurope Interchange Chart\u003c\/a\u003e.\u003c\/p\u003e\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44392697921751,"sku":"QC4","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/61r-8VfsyTL._AC_SL1500_40654786-9bbf-4e2e-9334-40caa215fdee.jpg?v=1705022865"},{"product_id":"marcy-adhesives-quickcure-replacement-nozzles-10-per-bag","title":"Marcy QuickCure Replacement Nozzles — 10 per Bag | QCN","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReplacement nozzles for Marcy QuickCure Rain Sensor Gel syringes — 10 nozzles per bag. Rain sensor gel nozzles clog when residual gel cures in the tip between uses. Having a supply of fresh nozzles on hand means no downtime waiting on a replacement tip before the next install. Compatible with both QC4 and QC12 QuickCure syringes.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e QCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 10 nozzles per bag\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Marcy QuickCure QC4 and QC12 syringes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eThread a fresh nozzle onto the QuickCure syringe before each use. After dispensing, replace the cap immediately to slow gel curing in the tip. If a nozzle becomes clogged, unthread and discard it — replace with a fresh nozzle from this pack. Do not attempt to clear a clogged nozzle.\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhy do the nozzles clog?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eQuickCure gel begins to cure when exposed to air. If gel remains in the nozzle tip after use, it cures and blocks the passageway. This is a normal characteristic of fast-cure adhesive gels. Replacing the cap immediately after use slows this process, but nozzle replacement is expected with regular use.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eHow many nozzles does one installation use?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eOne nozzle per session is typical. If you're doing multiple installs back-to-back, you may be able to use the same nozzle throughout — cap it between sensors. For sessions separated by hours or days, use a fresh nozzle each time.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eAre these nozzles compatible with both QC4 and QC12?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes. QCN nozzles fit both QC4 (4ml) and QC12 (12ml) QuickCure syringes.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eCan I clear a clogged nozzle instead of replacing it?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eNot recommended. Cured gel inside the nozzle is difficult to remove without damaging the tip, and a cleared nozzle may not dispense evenly. Replacement nozzles are inexpensive — use a fresh one for reliable results every time.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eHow should I store unused nozzles?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eStore unused nozzles in the original bag, away from direct sunlight and heat. They do not require any special storage — just keep them clean and dry until use.\u003c\/p\u003e\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44392773091543,"sku":"QCN","price":9.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/61lJ7bu8iFL._SL1500.jpg?v=1705024121"},{"product_id":"marcy-quickcure-leveler-for-quickcure-rain-sensor-gel","title":"Marcy QuickCure Leveler for Rain Sensor Gel Installation | QCL","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Marcy QuickCure Leveler is a hands-free positioning tool for rain sensor gel installations. It holds the sensor firmly against the glass during the 3–4 minute QuickCure cure cycle, eliminating the need for a technician to manually maintain pressure. The leveler ensures consistent, even contact between the sensor pad and the glass — critical for a secure, bubble-free bond and a clean result every time.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e QCL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Hands-free sensor positioning during QuickCure gel cure cycle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for use with Marcy QuickCure QC4 and QC12 gel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReusable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply QuickCure gel to the rain sensor pad and position the sensor on the glass. Attach the QCL leveler to hold the sensor firmly in place, maintaining consistent pressure throughout the cure window. Once the gel has fully cured (3–4 minutes), remove the leveler. Clean off any gel residue after each use.\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eDo I need the leveler, or can I hold the sensor by hand?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYou can hold the sensor by hand, but the leveler produces more consistent results. Hand pressure is difficult to keep perfectly even for 3–4 minutes, and any movement during the cure window can compromise the bond. The leveler pays for itself quickly in reduced callbacks and re-dos.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eIs the leveler reusable?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eYes. The QCL leveler is designed for repeated use. Clean off any gel residue after each use and store it with your QuickCure supplies.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eWhat sensors does the leveler work with?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eThe QCL leveler is designed to work with the full range of Marcy rain sensor pads (MSP series) and QuickCure gel. It accommodates the common sensor form factors found in domestic and import vehicles.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eDoes the leveler work with third-party rain sensor gel?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eThe QCL leveler is designed for use with Marcy QuickCure gel and may work with other gel products, but Marcy only tests and supports it with QC4 and QC12.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eHow do I select the right sensor pad for my vehicle?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eUse the Marcy interchange charts to match pad size to your sensor module: \u003ca href=\"https:\/\/marcyadhesives.com\/images\/pdf\/Marcy-Sensor-Pads-NAmerican-Interchange-Chart.pdf\"\u003eN. America Interchange Chart\u003c\/a\u003e | \u003ca href=\"https:\/\/marcyadhesives.com\/images\/pdf\/Marcy-Sensor-Pads-Europe-Interchange-Chart.pdf\"\u003eEurope Interchange Chart\u003c\/a\u003e.\u003c\/p\u003e\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44392788492503,"sku":"QCL","price":38.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/9216e59a-f474-4169-8823-17ef7ff9f626.23f36f3ab629c93fe385f4606d17639b.png?v=1705024357"},{"product_id":"foam-core-butyl-8mm-x-10-individually-boxed","title":"Marcy Foam-Core Butyl Tape — 8mm × 10ft | Individually Boxed | ME810B","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME810B foam-core butyl tape in a single-application box — the wider 8mm profile for windshield and fixed-glass installations requiring a larger bead. The foam center delivers compression deflection and rebound that solid butyl cannot match, creating a leak-proof seal even when the glass settles unevenly during cure. Ideal for vehicles with wider pinch weld channels, sunroofs, backsliders, and custom van or RV windows where a fuller butyl profile is needed. Many Ford, Lincoln, and Mercury OE installation procedures require foam-core butyl — ME810B covers those platforms when 8mm is specified. Individually boxed and ready to use on the job.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME810B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 8mm × 10ft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e Foam-core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Individually boxed (single-application)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Windshield, sunroof, backslider, and fixed-glass installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply to the pinch weld or vehicle channel before setting the glass. The 8mm profile is used when a wider channel or heavier bead is required. Designed for urethane-bonded fixed-glass installations where foam-core butyl is specified. Not intended for mechanically-fastened glass — use solid-core butyl for those applications.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is foam-core butyl and why is it different from solid-core?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eFoam-core butyl has a cellular foam center wrapped in butyl. The foam compresses as the glass is set and rebounds to fill gaps and voids, creating a conforming, leak-free seal. Solid-core butyl seals well but doesn't have the same rebound. Ford, Lincoln, Mercury OE procedures and many professional installation quality standards require foam-core because of this superior void-filling and leak-resistance characteristic.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 8mm vs. 6mm foam-core butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 8mm profile (ME810B) is used when the OEM procedure or the vehicle's pinch weld channel calls for a wider bead — typically larger vehicles, vans, trucks with wide channel openings, or custom van and RV windows. The 6mm profile (ME612C) covers the majority of standard passenger cars and light trucks. When in doubt, match to the OEM procedure or measure the channel width.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhich vehicles require foam-core butyl by OEM spec?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eMany Ford, Lincoln, and Mercury vehicles specifically call out foam-core butyl in their OEM windshield installation procedures. When servicing a Ford platform, default to foam-core. For other makes, refer to the vehicle-specific procedure — both foam-core and solid-core are used industry-wide, and using the wrong type can affect seal quality.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes foam-core butyl work in cold weather?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Marcy foam-core butyl remains workable across a wide temperature range. In temperatures below 40°F, warm the tape slightly before application to improve conformability and adhesion to the pinch weld. Avoid overheating — excessive heat will deform the foam core before the glass is set.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy is individually boxed butyl useful for mobile installers?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe Butyl-in-a-Box format keeps the tape clean and protected from dust, UV, and contamination until needed. For mobile installers working from a van or truck, it eliminates the handling issues of unwrapped bulk rolls and simplifies per-job material tracking. Each box contains a single-application length — open, use, done.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44394654007511,"sku":"ME810B","price":10.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/butyl_page_img_af85a855-7e98-4d7e-96a0-529ba983c22e.jpg?v=1705083840"},{"product_id":"copy-of-solid-core-butyl-1-4-x-10-round-individually-boxed","title":"Marcy Solid-Core Butyl Tape — 5\/16\" × 10ft | Individually Boxed | ME825","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME825 solid-core butyl tape in a single-application box — the 5\/16\" round profile for mechanically-fastened glass and general automotive sealing where a medium-diameter bead is needed. Steps up from the standard 1\/4\" when the channel or gap requires a fuller butyl profile to seal completely. Works reliably in hot and cold weather. Individually boxed for the mobile installer — no cutting, no re-wrapping. \u003cstrong\u003eNot intended for windshield installation — use foam-core butyl (ME612C or ME810B) for windshield applications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME825\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5\/16\" (7.9mm) round × 10ft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e Solid-core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Individually boxed (single-application)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mechanically-fastened side and back glass, door vapor barriers, general automotive sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply along the glass channel or frame opening before pressing the glass into position. The 5\/16\" profile fills wider channels than the standard 1\/4\" while remaining manageable for positioning the glass. For mechanically-fastened side, rear, and quarter glass and general body sealing. Do not use for urethane windshield installations — use foam-core butyl for those.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is solid-core butyl used for?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl is the correct sealant for mechanically-fastened glass — side windows, vent glass, sliding rear windows, and quarter glass on trucks and SUVs where fasteners hold the glass in position. It is also used for door poly vapor barrier re-adhesion and general body sealing where a flexible, weather-resistant bead is needed. It is not the correct product for urethane-bonded windshield installation — use foam-core butyl for those.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 5\/16\" instead of 1\/4\" or 3\/8\"?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eUse 5\/16\" (ME825\/ME815S) when the channel gap is too wide for the 1\/4\" bead to fill completely, but the 3\/8\" diameter would create too much resistance positioning the glass. The 5\/16\" is the middle profile — common on mid-size trucks, vans, and SUVs with moderately wider channels than standard passenger cars. When in doubt, match to the gap width in the seated position.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between solid-core and foam-core butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl is an all-butyl bead that seals effectively for mechanically-fastened glass. Foam-core butyl has a foam center that provides rebound compression — this is required for urethane windshield installation where the foam fills voids as the glass cures. Do not substitute one for the other in windshield applications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes solid butyl work in both hot and cold weather?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy solid butyl is formulated for all-weather use. In cold temperatures it stiffens slightly but remains workable with light warming. In hot weather it becomes softer and more pliable, which aids application but requires care not to stretch the bead during placement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eShould I use boxed or bulk solid butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eIndividually boxed (ME625, ME825, ME925) is ideal for mobile installers — each box is a clean, single-application length. Bulk packs (ME615S, ME815S, ME915S) offer a longer roll at lower cost per foot, better value for shops doing high-volume work where material efficiency outweighs the per-job convenience of the boxed format.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44394658234583,"sku":"ME825","price":12.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/51Wtvh3RNqL._AC_SL1200.jpg?v=1705087892"},{"product_id":"copy-of-solid-core-butyl-5-16-x-10-round-individually-boxed","title":"Marcy Solid-Core Butyl Tape — 3\/8\" × 10ft | Individually Boxed | ME925","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME925 solid-core butyl tape in a single-application box — the 3\/8\" round profile for mechanically-fastened glass applications with larger channel gaps and for heavy-duty body sealing tasks. The widest standard solid butyl profile, filling gaps that smaller diameters can't seal properly. Works reliably in hot and cold weather. Individually boxed for the mobile installer — no cutting, no re-wrapping. \u003cstrong\u003eNot intended for windshield installation — use foam-core butyl (ME612C or ME810B) for windshield applications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME925\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8\" (9.5mm) round × 10ft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e Solid-core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Individually boxed (single-application)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mechanically-fastened glass with wide channels, heavy-duty body sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply along the glass channel or frame opening before pressing the glass into position. The 3\/8\" profile is the largest standard solid butyl size, used when a substantial bead is needed to fill a wide channel gap completely. For mechanically-fastened side, rear, and quarter glass on larger trucks and vans. Do not use for urethane windshield installations — use foam-core butyl for those.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is solid-core butyl used for?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl is the correct sealant for mechanically-fastened glass — side windows, vent glass, sliding rear windows, and quarter glass where fasteners hold the glass in position. It is also used for door poly vapor barrier re-adhesion and general body sealing where a flexible, weather-resistant bead is needed. It is not the correct product for urethane-bonded windshield installation.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 3\/8\" instead of 1\/4\" or 5\/16\"?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 3\/8\" (ME925\/ME915S) is used when the channel gap is large enough that smaller profiles leave voids or don't compress enough to fully seal. Common applications include larger trucks, full-size vans, and commercial vehicles with wider glass channels, or any installation where the OEM procedure calls for a 3\/8\" butyl bead specifically. When in doubt, verify the channel width in the seated glass position.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between solid-core and foam-core butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl is an all-butyl bead that seals effectively for mechanically-fastened glass. Foam-core butyl has a cellular foam center that provides rebound compression for urethane windshield installation, where the foam fills voids as the glass settles during cure. Do not substitute one for the other in windshield applications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes solid butyl work in both hot and cold weather?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy solid butyl is formulated for all-weather use. In cold temperatures it stiffens slightly but remains workable with light warming. In hot weather it becomes softer, which aids conformability but requires care not to stretch or distort the bead during placement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eShould I use boxed or bulk solid butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eIndividually boxed (ME625, ME825, ME925) is ideal for mobile installers — each box is a clean, single-application length ready to use on the job. Bulk packs (ME615S, ME815S, ME915S) offer a longer roll at lower cost per foot, better value for shops doing high-volume work where material efficiency matters more than per-job convenience.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44394664853719,"sku":"ME925","price":13.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/41uMd0QNYJL._SL1200_19e7df8a-55d5-473d-a513-06ec49c7bde4.jpg?v=1705088090"},{"product_id":"copy-of-premium-wool-daubers-success-3-4-round-ball-5-length-100-pcs","title":"HT1RWD - Marcy Premium Wool Daubers - 1\/2\" round ball 5\" length \/ 100 pcs.","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHigh quality 100% wool dauber with 1\/2” diameter ball with 5” length stem for easy, clean use. Perfect for applying primer to the windshield. In order to prevent contamination, dip the dauber once into the primer. Once the primer has been applied to the glass, discard the dauber. Package includes 100 pieces.\u003c\/span\u003e\u003c\/p\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":44394685038807,"sku":"HT1RWD","price":11.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/agwd-.5_530x_2x_319014c5-4249-47e9-82a9-cd0279e09a10.jpg?v=1710980942"},{"product_id":"marcy-foam-tape","title":"Marcy Setting Block Foam Tape — 1\/4\" × 1\/4\" × 18ft | High Density | ME6494","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME6494 high-density foam tape prevents glass from sinking, reduces road noise, and delivers a professional flush finish on auto glass installations. Single-sided adhesive bonds to the vehicle body, allowing post-placement adjustment of the glass before the urethane sets. The high-density foam maintains its 1\/4\" profile under glass load — it won't compress flat and let the glass settle during cure. Compatible with all urethane adhesive types. Flexible enough to follow contoured sills and round corners without buckling.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME6494\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 1\/4\" (6.4mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1\/4\" (6.4mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 18ft per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive:\u003c\/strong\u003e Single-sided (body side)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e High\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Setting blocks for auto glass installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply to the sill area of the vehicle opening before glass installation. The foam tape acts as a setting block, maintaining the correct glass height while urethane cures. Single-sided adhesive keeps the glass free to reposition if needed before the urethane sets. Cut to length with scissors or a razor blade.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat does setting block foam tape do?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSetting block foam tape sits between the bottom edge of the glass and the vehicle body. Its primary purpose is to hold the glass at the correct installation height so it doesn't sink under its own weight before the urethane cures. Without setting blocks, heavy glass can settle unevenly during cure, causing fitment and leak problems. High-density foam maintains its height under load throughout the cure period.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy is the adhesive only on one side?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe single-sided adhesive bonds to the car body but leaves the glass free to be positioned and adjusted. If the tape adhered to both surfaces, any glass repositioning after placement would tear the tape. The glass rests on top of the foam profile — held by its weight and eventually by the curing urethane — while the foam maintains consistent height underneath.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 1\/4\" height vs. 5\/16\" height foam tape?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 1\/4\" height (ME6494) is the standard for most passenger vehicles with typical glass-to-body clearances. The 5\/16\" height (ME6495) is used when a taller setting block is needed — for vehicles with deeper channels, thicker glass edges, or when the OEM installation procedure specifies a taller block. Match the height to the gap between the glass bottom edge and the pinch weld with the glass in the seated position.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow much foam tape does a typical installation use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eMost installations use two to four short sections placed along the bottom sill — typically 3–8 inches each for a total of 8–20 inches per installation. At 18 feet per roll, one ME6494 provides enough tape for many vehicles. Cut strips to length with scissors or a razor blade.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs this tape compatible with all urethane adhesives?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — ME6494 is compatible with all standard urethane adhesives used in automotive glass installation. The foam does not react with or inhibit urethane curing. It works across all OEM-grade, extended-cure, and fast-cure urethane systems.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"ME6494   1\/4\" X  1\/4\" X 18'","offer_id":44420565172439,"sku":"ME6494","price":9.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/Screenshot2024-07-08at3.58.38PM.png?v=1720479535"},{"product_id":"copy-of-rain-sensor-pads","title":"Marcy Rain Sensor Pad — 44mm Round | MSP2649","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy MSP2649 rain sensor pad in 44mm round — the silicone interface pad that couples the rain sensor to the inside surface of a replacement windshield. Made from Marcy's fingerprint-resistant silicone using patented clamshell molds that produce a consistently shaped, thicker pad with complete glass contact and no air pockets. The clamshell packaging keeps pads free from contamination until the moment of application. Available in single or 5-pack quantities. Made in the USA.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e MSP2649\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 44mm round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fingerprint-resistant silicone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Clamshell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAvailable Quantities:\u003c\/strong\u003e 1-pack, 5-pack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Rain sensor to windshield optical interface after glass replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eAfter windshield installation, position the new pad between the rain sensor lens and the inside glass surface before remounting the sensor. Remove from clamshell packaging immediately before application to avoid contamination. Refer to the \u003ca href=\"https:\/\/marcyadhesives.com\/images\/pdf\/Marcy-Sensor-Pads-NAmerican-Interchange-Chart.pdf\"\u003eN. America Interchange Chart\u003c\/a\u003e or \u003ca href=\"https:\/\/marcyadhesives.com\/images\/pdf\/Marcy-Sensor-Pads-Europe-Interchange-Chart.pdf\"\u003eEurope Interchange Chart\u003c\/a\u003e to confirm this is the correct size for your vehicle.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy does the rain sensor need a new pad after windshield replacement?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe rain sensor maintains optical contact with the inside surface of the windshield glass to detect water droplets. The silicone pad fills the micro-gap between the sensor lens and the glass, eliminating air (which causes optical interference) and ensuring accurate sensor detection. The original pad bonds to the old glass and cannot be reused — a new pad is required with every windshield replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow do I know which pad size to use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003ePad size is matched to the rain sensor module on the vehicle, not to the windshield itself. Download the Marcy N. America or Europe Interchange Chart (links above) and cross-reference by vehicle year, make, and model to find the correct MSP part number. The pad should fully cover the sensor lens footprint without significant overhang on any side.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy is fingerprint-resistant silicone important?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eStandard silicone picks up skin oils and dust during handling, creating micro-voids and optical inconsistencies between the sensor and glass. These voids can cause false rain detection, missed detection, or sensor error codes. Marcy's fingerprint-resistant formula minimizes contamination transfer during application, maintaining a clean, full-contact optical interface.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the advantage of clamshell packaging?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eTraditional rain sensor pads come in bags where the silicone surface picks up lint and dust during storage. Marcy's clamshell holds the pad in a clean, closed case until the moment of installation. It also eliminates fumbling with a bag when you have urethane on your gloves — open the shell, remove the pad, apply, done.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat happens if the wrong size pad is used?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eIf the pad is too small, air gaps remain at the pad edge under the sensor lens, causing inconsistent detection or sensor error codes. If the pad is too large, it may prevent the sensor from seating flush against the glass or create optical distortion at the lens perimeter. Use the interchange chart to match the correct pad to the vehicle's sensor.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Single","offer_id":44449218592983,"sku":"MSP2649","price":6.0,"currency_code":"USD","in_stock":true},{"title":"5 Pack","offer_id":44449149223127,"sku":"MSP2649-5","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/Screenshot2023-12-18at4.31.23PM_b3944b0d-f49e-43be-82a0-5ab97b34715e.png?v=1706230985"},{"product_id":"copy-of-rain-sensor-pads-2","title":"Marcy Rain Sensor Pad — 32mm Round | MSP1845","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy MSP1845 rain sensor pad in 32mm round — the silicone interface pad that couples the rain sensor to the inside surface of a replacement windshield. Made from Marcy's fingerprint-resistant silicone using patented clamshell molds that produce a consistently shaped, thicker pad with complete glass contact and no air pockets. The clamshell packaging keeps pads free from contamination until the moment of application. Available in single or 5-pack quantities. Made in the USA.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e MSP1845\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 32mm round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fingerprint-resistant silicone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Clamshell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAvailable Quantities:\u003c\/strong\u003e 1-pack, 5-pack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Rain sensor to windshield optical interface after glass replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eAfter windshield installation, position the new pad between the rain sensor lens and the inside glass surface before remounting the sensor. Remove from clamshell packaging immediately before application to avoid contamination. Refer to the \u003ca href=\"https:\/\/marcyadhesives.com\/images\/pdf\/Marcy-Sensor-Pads-NAmerican-Interchange-Chart.pdf\"\u003eN. America Interchange Chart\u003c\/a\u003e or \u003ca href=\"https:\/\/marcyadhesives.com\/images\/pdf\/Marcy-Sensor-Pads-Europe-Interchange-Chart.pdf\"\u003eEurope Interchange Chart\u003c\/a\u003e to confirm this is the correct size for your vehicle.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy does the rain sensor need a new pad after windshield replacement?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe rain sensor maintains optical contact with the inside surface of the windshield glass to detect water droplets. The silicone pad fills the micro-gap between the sensor lens and the glass, eliminating air (which causes optical interference) and ensuring accurate sensor detection. The original pad bonds to the old glass and cannot be reused — a new pad is required with every windshield replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow do I know which pad size to use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003ePad size is matched to the rain sensor module on the vehicle, not to the windshield itself. Download the Marcy N. America or Europe Interchange Chart (links above) and cross-reference by vehicle year, make, and model to find the correct MSP part number. The pad should fully cover the sensor lens footprint without significant overhang on any side.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy is fingerprint-resistant silicone important?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eStandard silicone picks up skin oils and dust during handling, creating micro-voids and optical inconsistencies between the sensor and glass. These voids can cause false rain detection, missed detection, or sensor error codes. Marcy's fingerprint-resistant formula minimizes contamination transfer during application, maintaining a clean, full-contact optical interface.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the advantage of clamshell packaging?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eTraditional rain sensor pads come in bags where the silicone surface picks up lint and dust during storage. Marcy's clamshell holds the pad in a clean, closed case until the moment of installation. It also eliminates fumbling with a bag when you have urethane on your gloves — open the shell, remove the pad, apply, done.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat happens if the wrong size pad is used?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eIf the pad is too small, air gaps remain at the pad edge under the sensor lens, causing inconsistent detection or sensor error codes. If the pad is too large, it may prevent the sensor from seating flush against the glass or create optical distortion at the lens perimeter. Use the interchange chart to match the correct pad to the vehicle's sensor.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Single","offer_id":44449215152343,"sku":"MSP1845","price":6.0,"currency_code":"USD","in_stock":true},{"title":"5 Pack","offer_id":44449108459735,"sku":"MSP1845-5","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/Screenshot2023-12-18at4.25.27PM_f6e87084-0ba3-4ea6-bc6b-744060c9be0e.png?v=1706231016"},{"product_id":"copy-of-rain-sensor-pads-3","title":"Marcy Rain Sensor Pad — 27 × 32.5mm | MSP2947","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy MSP2947 rain sensor pad in 27×32.5mm — the silicone interface pad that couples the rain sensor to the inside surface of a replacement windshield. Made from Marcy's fingerprint-resistant silicone using patented clamshell molds that produce a consistently shaped, thicker pad with complete glass contact and no air pockets. The clamshell packaging keeps pads free from contamination until the moment of application. Available in single or 5-pack quantities. Made in the USA.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e MSP2947\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 27 × 32.5mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Rectangular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fingerprint-resistant silicone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Clamshell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAvailable Quantities:\u003c\/strong\u003e 1-pack, 5-pack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Rain sensor to windshield optical interface after glass replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eAfter windshield installation, position the new pad between the rain sensor lens and the inside glass surface before remounting the sensor. Remove from clamshell packaging immediately before application to avoid contamination. Refer to the \u003ca href=\"https:\/\/marcyadhesives.com\/images\/pdf\/Marcy-Sensor-Pads-NAmerican-Interchange-Chart.pdf\"\u003eN. America Interchange Chart\u003c\/a\u003e or \u003ca href=\"https:\/\/marcyadhesives.com\/images\/pdf\/Marcy-Sensor-Pads-Europe-Interchange-Chart.pdf\"\u003eEurope Interchange Chart\u003c\/a\u003e to confirm this is the correct size for your vehicle.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy does the rain sensor need a new pad after windshield replacement?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe rain sensor maintains optical contact with the inside surface of the windshield glass to detect water droplets. The silicone pad fills the micro-gap between the sensor lens and the glass, eliminating air (which causes optical interference) and ensuring accurate sensor detection. The original pad bonds to the old glass and cannot be reused — a new pad is required with every windshield replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow do I know which pad size to use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003ePad size is matched to the rain sensor module on the vehicle, not to the windshield itself. Download the Marcy N. America or Europe Interchange Chart (links above) and cross-reference by vehicle year, make, and model to find the correct MSP part number. The pad should fully cover the sensor lens footprint without significant overhang on any side.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy is fingerprint-resistant silicone important?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eStandard silicone picks up skin oils and dust during handling, creating micro-voids and optical inconsistencies between the sensor and glass. These voids can cause false rain detection, missed detection, or sensor error codes. Marcy's fingerprint-resistant formula minimizes contamination transfer during application, maintaining a clean, full-contact optical interface.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the advantage of clamshell packaging?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eTraditional rain sensor pads come in bags where the silicone surface picks up lint and dust during storage. Marcy's clamshell holds the pad in a clean, closed case until the moment of installation. It also eliminates fumbling with a bag when you have urethane on your gloves — open the shell, remove the pad, apply, done.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat happens if the wrong size pad is used?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eIf the pad is too small, air gaps remain at the pad edge under the sensor lens, causing inconsistent detection or sensor error codes. If the pad is too large, it may prevent the sensor from seating flush against the glass or create optical distortion at the lens perimeter. Use the interchange chart to match the correct pad to the vehicle's sensor.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Single","offer_id":44449213972695,"sku":"MSP2947","price":6.0,"currency_code":"USD","in_stock":true},{"title":"5 Pack","offer_id":44449101086935,"sku":"MSP2947-5","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/Screenshot2023-12-18at4.27.20PM_18a5072d-3b68-4242-8e4e-d52ef948923c.png?v=1706231038"},{"product_id":"copy-of-copy-of-rain-sensor-pads-4","title":"Marcy Rain Sensor Pad — 43mm Round | MSP1659","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy MSP1659 rain sensor pad in 43mm round — the silicone interface pad that couples the rain sensor to the inside surface of a replacement windshield. Made from Marcy's fingerprint-resistant silicone using patented clamshell molds that produce a consistently shaped, thicker pad with complete glass contact and no air pockets. The clamshell packaging keeps pads free from contamination until the moment of application. Available in single or 5-pack quantities. Made in the USA.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e MSP1659\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 43mm round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fingerprint-resistant silicone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Clamshell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAvailable Quantities:\u003c\/strong\u003e 1-pack, 5-pack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Rain sensor to windshield optical interface after glass replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eAfter windshield installation, position the new pad between the rain sensor lens and the inside glass surface before remounting the sensor. Remove from clamshell packaging immediately before application to avoid contamination. Refer to the \u003ca href=\"https:\/\/marcyadhesives.com\/images\/pdf\/Marcy-Sensor-Pads-NAmerican-Interchange-Chart.pdf\"\u003eN. America Interchange Chart\u003c\/a\u003e or \u003ca href=\"https:\/\/marcyadhesives.com\/images\/pdf\/Marcy-Sensor-Pads-Europe-Interchange-Chart.pdf\"\u003eEurope Interchange Chart\u003c\/a\u003e to confirm this is the correct size for your vehicle.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy does the rain sensor need a new pad after windshield replacement?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe rain sensor maintains optical contact with the inside surface of the windshield glass to detect water droplets. The silicone pad fills the micro-gap between the sensor lens and the glass, eliminating air (which causes optical interference) and ensuring accurate sensor detection. The original pad bonds to the old glass and cannot be reused — a new pad is required with every windshield replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow do I know which pad size to use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003ePad size is matched to the rain sensor module on the vehicle, not to the windshield itself. Download the Marcy N. America or Europe Interchange Chart (links above) and cross-reference by vehicle year, make, and model to find the correct MSP part number. The pad should fully cover the sensor lens footprint without significant overhang on any side.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy is fingerprint-resistant silicone important?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eStandard silicone picks up skin oils and dust during handling, creating micro-voids and optical inconsistencies between the sensor and glass. These voids can cause false rain detection, missed detection, or sensor error codes. Marcy's fingerprint-resistant formula minimizes contamination transfer during application, maintaining a clean, full-contact optical interface.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the advantage of clamshell packaging?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eTraditional rain sensor pads come in bags where the silicone surface picks up lint and dust during storage. Marcy's clamshell holds the pad in a clean, closed case until the moment of installation. It also eliminates fumbling with a bag when you have urethane on your gloves — open the shell, remove the pad, apply, done.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat happens if the wrong size pad is used?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eIf the pad is too small, air gaps remain at the pad edge under the sensor lens, causing inconsistent detection or sensor error codes. If the pad is too large, it may prevent the sensor from seating flush against the glass or create optical distortion at the lens perimeter. Use the interchange chart to match the correct pad to the vehicle's sensor.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Single","offer_id":44449217347799,"sku":"MSP1659","price":6.0,"currency_code":"USD","in_stock":false},{"title":"5 Pack","offer_id":44449112129751,"sku":"MSP1659-5","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/Screenshot2023-12-18at4.27.54PM_fce57c06-0ab3-4cdf-b0f1-f16f14ee1731.png?v=1706231052"},{"product_id":"copy-of-copy-of-copy-of-rain-sensor-pads-5","title":"Marcy Rain Sensor Pad — 44mm with Circle Aperture | MSP2731","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy MSP2731 rain sensor pad in 44mm with center circle aperture — a specialized silicone interface pad for rain sensor modules that require an open center to accommodate a protruding lens or mounting post. Made from Marcy's fingerprint-resistant silicone using patented clamshell molds that produce a consistently shaped, thicker pad with complete glass contact and no air pockets. The clamshell packaging keeps pads free from contamination until the moment of application. Available in single or 5-pack quantities. Made in the USA.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e MSP2731\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 44mm outer diameter with circle aperture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Round with center opening\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Fingerprint-resistant silicone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Clamshell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAvailable Quantities:\u003c\/strong\u003e 1-pack, 5-pack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Rain sensor to windshield optical interface for sensors with protruding lens or mounting post\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eAfter windshield installation, position the new pad between the rain sensor lens and the inside glass surface before remounting the sensor. The center aperture accommodates sensors with a protruding central lens or mounting element. Remove from clamshell packaging immediately before application to avoid contamination. Refer to the \u003ca href=\"https:\/\/marcyadhesives.com\/images\/pdf\/Marcy-Sensor-Pads-NAmerican-Interchange-Chart.pdf\"\u003eN. America Interchange Chart\u003c\/a\u003e or \u003ca href=\"https:\/\/marcyadhesives.com\/images\/pdf\/Marcy-Sensor-Pads-Europe-Interchange-Chart.pdf\"\u003eEurope Interchange Chart\u003c\/a\u003e to confirm this is the correct pad for your vehicle's sensor.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the circle aperture and when is it needed?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe circle aperture is an opening in the center of the pad that allows a protruding lens element, optical post, or mounting boss on the rain sensor module to pass through without compressing against the pad. Some rain sensor designs have a raised central element that contacts the glass directly — the aperture pad routes around this element so the pad perimeter creates the optical seal while the center element makes its own contact. The interchange chart identifies which vehicles require an aperture pad.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy does the rain sensor need a new pad after windshield replacement?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe rain sensor maintains optical contact with the inside surface of the windshield glass to detect water droplets. The silicone pad fills the micro-gap between the sensor lens and the glass, eliminating air (which causes optical interference) and ensuring accurate sensor detection. The original pad bonds to the old glass and cannot be reused — a new pad is required with every windshield replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow do I know which pad size to use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003ePad size is matched to the rain sensor module on the vehicle, not to the windshield itself. Download the Marcy N. America or Europe Interchange Chart (links above) and cross-reference by vehicle year, make, and model to find the correct MSP part number. The interchange chart also indicates whether an aperture pad is required for your specific sensor design.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy is fingerprint-resistant silicone important?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eStandard silicone picks up skin oils and dust during handling, creating micro-voids and optical inconsistencies between the sensor and glass. These voids can cause false rain detection, missed detection, or sensor error codes. Marcy's fingerprint-resistant formula minimizes contamination transfer during application, maintaining a clean, full-contact optical interface.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the advantage of clamshell packaging?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eTraditional rain sensor pads come in bags where the silicone surface picks up lint and dust during storage. Marcy's clamshell holds the pad in a clean, closed case until the moment of installation. It also eliminates fumbling with a bag when you have urethane on your gloves — open the shell, remove the pad, apply, done.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Single","offer_id":44449217577175,"sku":"MSP2731","price":6.0,"currency_code":"USD","in_stock":false},{"title":"5 Pack","offer_id":44449113080023,"sku":"MSP2731-5","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/Screenshot2023-12-18at4.28.25PM_34a63ef9-20ba-4e9b-a87f-2729d4539c47.png?v=1706231064"},{"product_id":"foam-tape-5-16-1-4-x-18-single-sided-high-density","title":"Marcy Setting Block Foam Tape — 5\/16\" × 1\/4\" × 18ft | High Density | ME6495","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME6495 high-density foam tape in the taller 5\/16\" profile — for auto glass installations where a higher setting block is needed to achieve the correct glass-to-body height. Single-sided adhesive bonds to the vehicle body, leaving the glass free to reposition before the urethane sets. High-density foam maintains its 5\/16\" height under glass load throughout the cure period. Compatible with all urethane adhesive types. Flexible enough to follow contoured sills and round corners without buckling.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME6495\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 5\/16\" (7.9mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1\/4\" (6.4mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 18ft per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesive:\u003c\/strong\u003e Single-sided (body side)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e High\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Setting blocks for auto glass installation requiring taller block height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply to the sill area of the vehicle opening before glass installation. Use the 5\/16\" profile when the OEM procedure or vehicle's channel depth requires a taller setting block than the standard 1\/4\". Single-sided adhesive keeps the glass free to reposition if needed. Cut to length with scissors or a razor blade.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat does setting block foam tape do?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSetting block foam tape sits between the bottom edge of the glass and the vehicle body. Its primary purpose is to hold the glass at the correct installation height so it doesn't sink under its own weight before the urethane cures. Without setting blocks, heavy glass can settle unevenly during cure, causing fitment and leak problems. High-density foam maintains its height under load throughout the cure period.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 5\/16\" height instead of 1\/4\"?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 5\/16\" profile (ME6495) is used when the vehicle's glass channel depth, pinch weld geometry, or OEM installation procedure requires a taller setting block than the standard 1\/4\" (ME6494). Common applications include vehicles with deeper channels or thicker glass edge profiles where the 1\/4\" block doesn't bring the glass to the correct height. When in doubt, measure the gap between the glass bottom edge and the pinch weld in the seated position.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy is the adhesive only on one side?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe single-sided adhesive bonds to the car body but leaves the glass free to be positioned and adjusted. If the tape adhered to both surfaces, any glass repositioning after placement would tear the tape. The glass rests on top of the foam profile — held by its weight and eventually by the curing urethane — while the foam maintains consistent height underneath.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow much foam tape does a typical installation use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eMost installations use two to four short sections placed along the bottom sill — typically 3–8 inches each for a total of 8–20 inches per installation. At 18 feet per roll, one ME6495 provides enough tape for many vehicles. Cut strips to length with scissors or a razor blade.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs this tape compatible with all urethane adhesives?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — ME6495 is compatible with all standard urethane adhesives used in automotive glass installation. The foam does not react with or inhibit urethane curing. It works across all OEM-grade, extended-cure, and fast-cure urethane systems.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":45395800162519,"sku":"ME6495","price":10.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/Screenshot2024-07-08at3.58.38PM_e1568e41-c343-484f-b308-4702c9cdbf23.png?v=1720479551"},{"product_id":"foam-setting-spacer-blocks-5-16-x-1-4-x-1-72-blocks-pad","title":"Marcy Foam Windshield Setting \u0026amp; Spacer Blocks 5\/16\" x 1\/4\" x 1\" | 288 Blocks | ME7495","description":"\u003cp\u003e✓ In stock\u003c\/p\u003e\n\n\u003cp\u003eThese Marcy foam windshield setting and spacer blocks deliver a flexible, compressible fit for glass positioning during urethane installations. Each block measures 5\/16\" × 1\/4\" × 1\" and features a self-adhesive backing for hands-free placement on the pinchweld. Sold in packs of 288 blocks (4 pads), these foam spacers are a shop staple for achieving consistent, repeatable setting heights across a wide range of vehicle makes and models.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Windshield Setting \/ Spacer Block\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Foam with Self-Adhesive Backing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 5\/16\" × 1\/4\" × 1\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 288 Blocks (4 Pads)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal — Windshield \/ Pinchweld\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eUniversal — Compatible with most automotive windshield installations requiring a 5\/16\" setting height\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCross-Reference Numbers\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarcy Part#:\u003c\/strong\u003e ME7495\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSMS Part#:\u003c\/strong\u003e ME7495\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between foam and nylon setting blocks?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eFoam blocks are slightly compressible, which can help accommodate minor pinchweld irregularities and provide a small amount of vibration dampening. Nylon blocks are rigid and maintain a precise, fixed height. Foam blocks are commonly used in high-volume auto glass shops for their versatility; nylon blocks are preferred when a specific OEM setting height must be maintained exactly.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow many blocks come in each pack?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEach pack contains 288 individual foam blocks supplied on 4 pads. This format makes it easy to dispense individual blocks during installation and keep the remainder clean and organized on the pad between jobs.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat does the self-adhesive backing do?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe self-adhesive backing holds each foam block in place on the pinchweld flange while you position and lower the windshield glass. This prevents the block from shifting during placement, reducing the need for a second technician to hold blocks in position during installation.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat setting height do these blocks provide, and are other sizes available?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThese blocks provide a 5\/16\" setting height. South Mountain Supply also carries 1\/4\" foam setting blocks (ME7494) for shallower applications and 3\/8\" foam setting blocks (ME7496) for taller settings. Select the size that matches your vehicle's pinchweld depth and urethane bead profile.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eAre foam setting blocks removed after the urethane cures?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eIn most urethane windshield installations, setting blocks remain permanently in place once the adhesive cures — they become encapsulated within the urethane bond. Attempting to remove them after cure can compromise the seal. Always follow the adhesive manufacturer's installation instructions for your specific application.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":45395931300055,"sku":"ME7495","price":26.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/FB250P_12459.jpg?v=1745970128"},{"product_id":"me3300-window-guard","title":"ME3030 - Marcy Window Crash Guard","description":"\u003cp\u003e36\" X 60ft. w\/ 3ft. prefs.  Delivered in Smart Box.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eFollowing the breaking of vehicle glass, WindowGuard™ protects the vehicle’s interior until permanent replacement glass is installed. It’s quick, economical, and effective. Constructed of a clear, flexible, self-adhesive film, WindowGuard™ is perforated every 36” to make installations fast and easy. Optically clear with no-residue adhesive for clean removal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMade in the USA.\u003c\/p\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46364121235671,"sku":"ME3030","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/marcy-windowguard-01-c90a9931.webp?v=1749947697"},{"product_id":"pugm1-marcy-underglass-molding-8mm-x-75-ft","title":"Marcy PUGM1 Underglass Molding 8mm × 75ft | Solid | Windshield Installation","description":"\u003cp\u003e\u003cstrong\u003e✓ In stock\u003c\/strong\u003e — ships within 1 business day\u003c\/p\u003e\n\u003cp\u003eMarcy PUGM1 is an 8mm solid underglass molding — the foundation strip that sits between the glass and the pinch weld during windshield installation. Solid construction provides a firm, dimensionally stable profile that holds its shape without compression. Made in the USA. Sold per 75-foot roll.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 8mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 75ft per roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Marcy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e PUGM1\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWidth Selection Guide\u003c\/h2\u003e\n\u003cp\u003eSelect PUGM width based on the measured pinch weld or channel dimension of the vehicle being serviced. The molding should fill the channel adequately — too narrow and the glass sits unevenly; too wide and the glass sits too high. Verify measurement before ordering.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat is underglass molding used for?\u003c\/summary\u003e\n\u003cp\u003eUnderglass molding — also called setting tape or setting bead — is placed along the pinch weld before the glass is set into the urethane bead. It provides a consistent resting surface that keeps the glass at the correct height and prevents it from sinking into the urethane before it cures. It also protects the glass edge from direct contact with the metal body.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhen should I use solid vs. sponge vs. firm sponge PUGM?\u003c\/summary\u003e\n\u003cp\u003eSolid PUGM (this product) holds its dimension without compressing — best when the pinch weld height is consistent and you need the glass to sit at a specific, fixed height. Sponge profiles compress slightly to accommodate minor variations in pinch weld height across the opening. Firm sponge sits between the two — it compresses somewhat but with more resistance than standard sponge. Most shops stock all three to match vehicle-specific conditions.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow many feet of underglass molding does a typical installation require?\u003c\/summary\u003e\n\u003cp\u003eA standard passenger vehicle windshield opening typically requires 10–14 feet of underglass molding, placed along the bottom and sides of the pinch weld. A 75-foot roll covers approximately 5–7 complete windshield installations, making it a practical single-roll shop supply.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs Marcy PUGM compatible with urethane and ribbon sealer installations?\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy PUGM underglass molding is designed for use with both urethane (most common on modern vehicles) and ribbon sealer (used on older vehicles). The solid profile is particularly reliable under urethane installations where a firm, non-compressing base is needed for consistent glass height across the opening.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow does PUGM1 differ from the other PUGM profiles (PUGM2 through PUGM7)?\u003c\/summary\u003e\n\u003cp\u003ePUGM1 is the widest solid profile at 8mm. PUGM2 (5mm sponge) and PUGM3 (7mm sponge) are narrower and compress more. PUGM4 and PUGM5 are firm sponge profiles at 7mm and 6mm respectively. PUGM6 is a 9.5mm sponge and PUGM7 is a 10mm solid — both for deeper channels. Choose based on your pinch weld measurement and the compression behavior needed for the installation.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46402986410199,"sku":"PUGM1","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/PUGM1.jpg?v=1750121687"},{"product_id":"pugm2-marcy-underglass-molding-5mm-x-75-ft","title":"Marcy PUGM2 Underglass Molding 5mm × 75ft | Sponge | Windshield Installation","description":"\u003cp\u003e\u003cstrong\u003e✓ In stock\u003c\/strong\u003e — ships within 1 business day\u003c\/p\u003e\n\u003cp\u003eMarcy PUGM2 is a 5mm sponge underglass molding — the narrowest profile in the PUGM line, designed for vehicles with shallow pinch welds. Sponge construction compresses slightly under the glass for a forgiving, conforming fit. Made in the USA. Sold per 75-foot roll.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 75ft per roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Sponge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Marcy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e PUGM2\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWidth Selection Guide\u003c\/h2\u003e\n\u003cp\u003ePUGM2's 5mm width is suited to vehicles with shallower pinch welds — typically compact cars and many imports. Verify pinch weld depth before ordering. For deeper channels, see PUGM3 (7mm sponge), PUGM6 (9.5mm sponge), PUGM1 (8mm solid), or PUGM7 (10mm solid).\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat is underglass molding used for?\u003c\/summary\u003e\n\u003cp\u003eUnderglass molding — also called setting tape or setting bead — is placed along the pinch weld before the glass is set into the urethane bead. It keeps the glass at the correct height, prevents it from sinking before the urethane cures, and protects the glass edge from direct contact with the metal pinch weld.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhen should I use sponge vs. solid vs. firm sponge PUGM?\u003c\/summary\u003e\n\u003cp\u003eSponge profiles (PUGM2, PUGM3, PUGM6) compress under the weight of the glass — they're ideal for vehicles where slight pinch weld height variation exists across the opening, as the compression accommodates inconsistencies. Solid profiles (PUGM1, PUGM7) don't compress and provide a fixed glass height. Firm sponge (PUGM4, PUGM5) compresses with more resistance — a middle ground between full sponge and solid.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow many feet of underglass molding does a typical installation require?\u003c\/summary\u003e\n\u003cp\u003eA standard passenger vehicle windshield opening typically requires 10–14 feet of underglass molding along the pinch weld. A 75-foot roll covers approximately 5–7 complete installations — a practical single-roll supply for most shops.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs Marcy PUGM compatible with urethane and ribbon sealer installations?\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy PUGM underglass molding works with both urethane and ribbon sealer methods. The sponge profile is especially well-suited to urethane installations on vehicles where slight pinch weld irregularities might cause height variation under a rigid molding.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow does PUGM2 differ from the other PUGM profiles?\u003c\/summary\u003e\n\u003cp\u003ePUGM2 is the narrowest sponge profile at 5mm. PUGM3 (7mm sponge) and PUGM6 (9.5mm sponge) are wider sponge options. PUGM4 (7mm firm sponge) and PUGM5 (6mm firm sponge) offer more resistance to compression. PUGM1 (8mm solid) and PUGM7 (10mm solid) don't compress at all. Choose based on pinch weld measurement and the compression behavior needed.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46403012493527,"sku":"PUGM2","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/PUGM2.jpg?v=1750121660"},{"product_id":"pugm3-marcy-underglass-molding-7mm-x-75-ft","title":"Marcy PUGM3 Underglass Molding 7mm × 75ft | Sponge | Windshield Installation","description":"\u003cp\u003e\u003cstrong\u003e✓ In stock\u003c\/strong\u003e — ships within 1 business day\u003c\/p\u003e\n\u003cp\u003eMarcy PUGM3 is a 7mm sponge underglass molding — the most commonly used sponge width in the PUGM line, fitting a broad range of mid-size domestic and import vehicles. Sponge construction compresses slightly under the glass for a conforming, forgiving fit across minor pinch weld variations. Made in the USA. Sold per 75-foot roll.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 7mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 75ft per roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Sponge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Marcy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e PUGM3\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWidth Selection Guide\u003c\/h2\u003e\n\u003cp\u003ePUGM3's 7mm width is one of the most versatile options in the PUGM line and works across a wide range of vehicles. For shallower pinch welds, see PUGM2 (5mm sponge). For deeper channels, see PUGM6 (9.5mm sponge) or PUGM7 (10mm solid). For a firm sponge option at 7mm, see PUGM4.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat is underglass molding used for?\u003c\/summary\u003e\n\u003cp\u003eUnderglass molding is placed along the pinch weld before the glass is set into the urethane bead. It provides a consistent resting surface that keeps the glass at the correct height and prevents it from sinking before the urethane cures. It also protects the glass edge from direct contact with the metal pinch weld.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhen should I use sponge vs. solid vs. firm sponge PUGM?\u003c\/summary\u003e\n\u003cp\u003eSponge (this product) compresses slightly under the glass, accommodating minor pinch weld height variation across the opening — useful when the pinch weld isn't perfectly consistent. Solid profiles (PUGM1, PUGM7) hold a fixed height without compression. Firm sponge (PUGM4, PUGM5) compresses with more resistance than standard sponge — a middle ground for situations requiring some flexibility but more control over final glass height.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow many feet of underglass molding does a typical installation require?\u003c\/summary\u003e\n\u003cp\u003eA standard passenger vehicle windshield opening requires approximately 10–14 feet of underglass molding along the pinch weld. A 75-foot roll covers 5–7 complete installations — a practical shop supply quantity.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs Marcy PUGM compatible with urethane and ribbon sealer installations?\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy PUGM underglass molding works with both urethane and ribbon sealer methods. The 7mm sponge profile is particularly well-suited to urethane installations on a wide range of vehicles where slight pinch weld variation is expected.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow does PUGM3 differ from PUGM4, which is also 7mm?\u003c\/summary\u003e\n\u003cp\u003ePUGM3 is standard sponge — it compresses more readily under the glass, making it more forgiving on inconsistent or wavy pinch welds. PUGM4 is firm sponge at the same 7mm width — it resists compression more, giving the installer better control over final glass height while still accommodating minor variations. Use PUGM3 when you need maximum conformity; use PUGM4 when you want more firmness with just a little give.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46403052208343,"sku":"PUGM3","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/PUGM3.jpg?v=1750121636"},{"product_id":"pugm4-marcy-underglass-molding-7mm-x-75-ft","title":"Marcy PUGM4 Underglass Molding 7mm × 75ft | Firm Sponge | Windshield Installation","description":"\u003cp\u003e\u003cstrong\u003e✓ In stock\u003c\/strong\u003e — ships within 1 business day\u003c\/p\u003e\n\u003cp\u003eMarcy PUGM4 is a 7mm firm sponge underglass molding — the middle ground between standard sponge and solid. It compresses under the glass for some give, but with more resistance than PUGM3, giving the installer better control over final glass height without sacrificing all flexibility. Made in the USA. Sold per 75-foot roll.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 7mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 75ft per roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Firm Sponge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Marcy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e PUGM4\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWidth Selection Guide\u003c\/h2\u003e\n\u003cp\u003ePUGM4 at 7mm firm sponge is the controlled-compression option for mid-depth pinch welds. For a softer 7mm sponge, see PUGM3. For a 6mm firm sponge, see PUGM5. For solid (no compression) options, see PUGM1 (8mm) or PUGM7 (10mm).\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat is underglass molding used for?\u003c\/summary\u003e\n\u003cp\u003eUnderglass molding is placed along the pinch weld before the glass is set into the urethane bead. It provides a consistent resting surface that keeps the glass at the correct height and prevents it from sinking before the urethane cures. It also protects the glass edge from direct contact with the metal pinch weld.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat makes firm sponge different from standard sponge and solid?\u003c\/summary\u003e\n\u003cp\u003eStandard sponge (PUGM2, PUGM3) compresses readily — maximum conformity, best for uneven pinch welds. Solid (PUGM1, PUGM7) doesn't compress — a fixed, predictable height. Firm sponge (this product) splits the difference: it gives slightly under the glass weight for better seating than solid, but resists enough that the installer has more control over how high the glass sits than with a softer sponge. Many experienced technicians prefer firm sponge as a general-purpose underglass option.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow many feet of underglass molding does a typical installation require?\u003c\/summary\u003e\n\u003cp\u003eA standard passenger vehicle windshield requires approximately 10–14 feet of underglass molding. A 75-foot roll covers 5–7 complete installations — enough for a week or more of steady windshield work for most technicians.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs Marcy PUGM compatible with urethane and ribbon sealer installations?\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy PUGM works with both urethane and ribbon sealer. Firm sponge is especially useful in urethane applications where some give is needed but the installer wants to maintain more predictable glass height than a soft sponge provides.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow does PUGM4 compare to PUGM5, the other firm sponge option?\u003c\/summary\u003e\n\u003cp\u003ePUGM4 is 7mm firm sponge; PUGM5 is 6mm firm sponge. Both have the same resistance level and compression behavior — the only difference is the width. Choose PUGM4 for vehicles with mid-depth pinch welds (~7mm) and PUGM5 for slightly shallower pinch welds (~6mm).\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46403082977495,"sku":"PUGM4","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/PUGM4.jpg?v=1750121614"},{"product_id":"pugm5","title":"Marcy PUGM5 Underglass Molding 6mm × 75ft | Firm Sponge | Windshield Installation","description":"\u003cp\u003e\u003cstrong\u003e✓ In stock\u003c\/strong\u003e — ships within 1 business day\u003c\/p\u003e\n\u003cp\u003eMarcy PUGM5 is a 6mm firm sponge underglass molding — controlled compression for vehicles with shallower pinch welds. Firm sponge construction gives slightly under the glass for a good seat while resisting enough to maintain a consistent glass height. Made in the USA. Sold per 75-foot roll.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 6mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 75ft per roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e Firm Sponge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Marcy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e PUGM5\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWidth Selection Guide\u003c\/h2\u003e\n\u003cp\u003ePUGM5 at 6mm firm sponge is ideal for vehicles with slightly shallower pinch welds than the 7mm options. For the same firm sponge behavior at 7mm, see PUGM4. For a softer sponge at 5mm, see PUGM2. For the narrowest solid option, see PUGM1 (8mm solid).\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat is underglass molding used for?\u003c\/summary\u003e\n\u003cp\u003eUnderglass molding sits along the pinch weld before the glass is set into the urethane. It keeps the glass at the correct height, prevents sinking before the urethane cures, and protects the glass edge from direct metal contact.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat makes firm sponge different from standard sponge and solid?\u003c\/summary\u003e\n\u003cp\u003eStandard sponge compresses more readily — best for uneven pinch welds where maximum conformity is needed. Solid doesn't compress at all — a fixed, predictable height. Firm sponge (this product) is the middle ground: it gives slightly for better glass seating than solid, while resisting enough to give the installer more height control than a soft sponge. Many technicians use firm sponge as their default underglass choice.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow many feet of underglass molding does a typical installation require?\u003c\/summary\u003e\n\u003cp\u003eA standard passenger vehicle windshield requires approximately 10–14 feet of underglass molding. A 75-foot roll covers 5–7 complete installations — a practical stock quantity for active technicians.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs Marcy PUGM compatible with urethane and ribbon sealer installations?\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy PUGM works with both urethane and ribbon sealer. Firm sponge is well-suited to urethane applications where the installer wants more height control than standard sponge provides while still having some give for glass seating.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eHow does PUGM5 compare to PUGM4?\u003c\/summary\u003e\n\u003cp\u003ePUGM5 (6mm firm sponge) and PUGM4 (7mm firm sponge) have identical compression behavior — only the width differs. Use PUGM5 when the pinch weld depth is closer to 6mm; use PUGM4 when it's closer to 7mm. If you're between sizes, the slightly wider option generally provides a better seal.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46406815056087,"sku":"PUGM5","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/PUGM5.jpg?v=1750121585"},{"product_id":"pugm6-marcy-underglass-molding-9-5mm-x-75ft-sponge","title":"Marcy PUGM6 Underglass Molding 9.5mm × 75ft | Sponge | Windshield Installation","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Marcy PUGM6 is a 9.5mm sponge underglass molding designed for windshield and auto glass installation. Sponge compound compresses easily to fill the gap between glass and pinchweld, creating a weather-tight, rattle-free seal. Sold as a 75ft roll.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e PUGM6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 9.5mm (3\/8\")\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 75ft (22.8m) roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompound:\u003c\/strong\u003e Sponge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Underglass \/ windshield installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWidth Selection Guide\u003c\/h2\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the pinchweld. For sponge compound, select a molding that's 1–2mm wider than the measured gap — sponge compresses under glass weight and creates a tighter seal than a loose fit. At 9.5mm, PUGM6 fits a wide range of domestic and import windshield openings where the gap runs in the 8–9mm range.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat's the difference between sponge and solid underglass molding?\u003c\/summary\u003e\n\u003cp\u003eSponge compound is softer and more compressible — it flattens slightly when the glass is set, filling irregular gaps and absorbing minor alignment differences. Solid compound is denser and holds its shape, which makes it ideal for tight, consistent gaps. For most windshield installations with a standard pinchweld, sponge is the more forgiving choice.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I know which width to order?\u003c\/summary\u003e\n\u003cp\u003eMeasure the gap between the edge of the glass and the pinchweld before ordering. For sponge molding, select a width 1–2mm larger than the measured gap to ensure the compound compresses into a proper seal. If you're between sizes, go up, not down.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow much molding does one job use?\u003c\/summary\u003e\n\u003cp\u003eA standard windshield typically uses 6 to 9 feet of underglass molding. A 75ft roll covers approximately 8 to 12 installs. For high-volume shops, buying by the roll keeps your cost per job low.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan this be used on rear or side glass?\u003c\/summary\u003e\n\u003cp\u003eYes. Underglass molding is used anywhere there's a pinchweld-to-glass gap that needs sealing — front windshields, rear windows, and quarter glass. Confirm the gap width before ordering to ensure the right size for each application.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eDoes this molding need adhesive?\u003c\/summary\u003e\n\u003cp\u003eUnderglass molding is held in place by the weight and pressure of the glass itself, along with the urethane adhesive bead. No separate adhesive is needed for the molding. Position it along the pinchweld before setting the glass, and the compression from installation locks it in place.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46406865125591,"sku":"PUGM6","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/PUGM6.jpg?v=1750121558"},{"product_id":"pugm7-marcy-underglass-molding-10mm-x-75ft-solid","title":"Marcy PUGM7 Underglass Molding 10mm × 75ft | Solid | Windshield Installation","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Marcy PUGM7 is a 10mm solid underglass molding for windshield and auto glass installation. Solid compound maintains its shape and provides a firm, consistent support surface between the glass edge and the pinchweld. Sold as a 75ft roll.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e PUGM7\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 10mm (3\/8\")\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 75ft (22.8m) roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompound:\u003c\/strong\u003e Solid\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Underglass \/ windshield installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWidth Selection Guide\u003c\/h2\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the pinchweld. Solid compound does not compress significantly, so select a width that closely matches your measured gap. At 10mm, PUGM7 is one of the larger solid options and is suited for vehicles where the pinchweld gap runs wider than standard — confirm your measurement before ordering.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat's the difference between solid and sponge underglass molding?\u003c\/summary\u003e\n\u003cp\u003eSolid compound holds its shape under the glass — it doesn't compress or deform during installation. This gives you a stable, uniform support surface and is ideal for consistent gaps where you want predictable placement. Sponge is better for irregular or tight gaps where some flex is needed. For clean, consistent pinchwelds with a known gap width, solid is the more precise choice.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I choose the right width?\u003c\/summary\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the pinchweld. For solid molding, select a width that matches or is within 0.5mm of your gap — solid compound doesn't compress, so a loose fit won't seal properly. If your measurement puts you between sizes, go slightly smaller; the adhesive bead handles the rest of the seal.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow much molding does one job use?\u003c\/summary\u003e\n\u003cp\u003eA standard windshield typically uses 6 to 9 feet of underglass molding. A 75ft roll covers approximately 8 to 12 installs — well-suited for shop stock or ongoing jobs.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan this be used on rear or side glass?\u003c\/summary\u003e\n\u003cp\u003eYes. Solid underglass molding works for any opening with a consistent pinchweld gap — front windshields, rear windows, and quarter glass. Confirm the exact gap width before ordering to make sure 10mm solid is the right fit for your application.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eDoes this molding need adhesive?\u003c\/summary\u003e\n\u003cp\u003eNo separate adhesive is needed for the molding itself. The glass weight and urethane adhesive bead hold everything in place. Position the molding along the pinchweld before glass set, and the installation process secures it.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46406875709655,"sku":"PUGM7","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/PUGM7.jpg?v=1750121534"},{"product_id":"qm16-marcy-quantum-molding-16mm-x-22-8","title":"Marcy Quantum Molding 16mm × 75ft | 5\/8\" Universal Exterior Replacement | QM16","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Marcy QM16 is a 16mm flexible universal exterior replacement molding, sold as a 75ft roll. A versatile mid-width option, it fits a wide range of standard glass openings on sedans, SUVs, and light trucks. The flexible compound seats cleanly around the glass perimeter and provides a durable, weather-resistant finish wherever original molding has failed or been removed.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e QM16\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 16mm (approx. 5\/8\")\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 75ft (22.8m) roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal exterior replacement molding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWidth Selection Guide\u003c\/h2\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the surrounding trim or channel. At 16mm, QM16 is a common fit for mid-size sedans, crossovers, and SUVs with standard exterior molding channels. If you need the same width with a decorative accent on the outer face, the QM16L Design Line is the same molding with an integrated trim detail.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is Quantum Molding?\u003c\/summary\u003e\n\u003cp\u003eQuantum Molding is a flexible exterior universal replacement molding designed to fit a wide range of glass openings without requiring a vehicle-specific part. It installs along the exterior glass edge and provides a clean, weather-resistant finish. It's commonly used when OEM molding is damaged, missing, or no longer available as a direct replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat's the difference between QM16 and QM16L?\u003c\/summary\u003e\n\u003cp\u003eBoth are 16mm wide, but QM16L is the Design Line version — it has a decorative accent integrated into the outer face of the molding, giving it a more finished, OEM-style appearance from the exterior. If the molding will be highly visible and the vehicle had a more styled original trim, QM16L is worth considering. For a straightforward replacement with a clean profile, QM16 is the standard choice.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I select the right width?\u003c\/summary\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the surrounding trim or pinchweld. The molding width should match this gap closely. Quantum Molding is flexible enough to handle minor variation, but if you're between sizes, the narrower width typically seats more cleanly than one that's too wide.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow is this installed?\u003c\/summary\u003e\n\u003cp\u003ePress the molding into place along the glass edge, typically after the glass has been set. Work around the perimeter section by section, pressing firmly into the channel. For tight curves, a brief pass with a heat gun on low makes the molding more pliable. A molding tool or wide flathead helps seat it evenly without scuffing the surrounding trim.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow much molding does one job use?\u003c\/summary\u003e\n\u003cp\u003eA standard windshield perimeter uses approximately 12 to 16 feet of exterior molding. A 75ft roll covers roughly 4 to 6 full installs. For smaller glass like quarter windows or rear sliders, a roll goes significantly further.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46406997999831,"sku":"QM16","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/QM16-3D_4b2139d2-449e-49d4-866c-9ee0fb39717b.jpg?v=1750120797"},{"product_id":"qm19-marcy-quantum-molding-19mm-x-22-8m-3-4-x-75ft","title":"Marcy Quantum Molding 19mm × 75ft | 3\/4\" Universal Exterior Replacement | QM19","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Marcy QM19 is a 19mm flexible universal exterior replacement molding, sold as a 75ft roll. A common width for full-size domestic vehicles, SUVs, and vans, it installs cleanly along the glass perimeter and provides a durable, finished edge wherever original molding has deteriorated or been removed. The flexible compound works around curves without kinking.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e QM19\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 19mm (approx. 3\/4\")\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 75ft (22.8m) roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal exterior replacement molding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWidth Selection Guide\u003c\/h2\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the surrounding trim or channel. At 19mm, QM19 suits full-size cars, SUVs, pickups, and vans with wider exterior molding channels. If you need the same width with a decorative accent, the QM19L Design Line is the same profile with an integrated trim detail on the outer face.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is Quantum Molding?\u003c\/summary\u003e\n\u003cp\u003eQuantum Molding is a flexible exterior universal replacement molding designed to fit a wide range of glass openings without requiring a vehicle-specific part. It installs along the exterior glass edge and provides a clean, weather-resistant finish. It's commonly used when OEM molding is damaged, missing, or no longer available as a direct replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat's the difference between QM19 and QM19L?\u003c\/summary\u003e\n\u003cp\u003eBoth are 19mm wide, but QM19L is the Design Line version — it includes a decorative accent on the outer face of the molding, giving the installation a more styled, OEM-like appearance. If aesthetics and visible trim detail matter for the job, QM19L is the upgrade. For a clean standard replacement profile, QM19 is the straightforward choice.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I select the right width?\u003c\/summary\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the surrounding trim or pinchweld. The molding width should match this gap closely. Quantum Molding is flexible enough to handle minor variation, but if you're between sizes, the narrower width typically seats more cleanly than one that's too wide.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow is this installed?\u003c\/summary\u003e\n\u003cp\u003ePress the molding into place along the glass edge, typically after the glass has been set. Work around the perimeter section by section, pressing firmly into the channel. For tight curves, a brief pass with a heat gun on low makes the molding more pliable. A molding tool or wide flathead helps seat it evenly without scuffing the surrounding trim.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow much molding does one job use?\u003c\/summary\u003e\n\u003cp\u003eA standard windshield perimeter uses approximately 12 to 16 feet of exterior molding. A 75ft roll covers roughly 4 to 6 full installs. For smaller glass like quarter windows or rear sliders, a roll goes significantly further.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46407001800919,"sku":"QM19","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/QM19-3D.jpg?v=1750121455"},{"product_id":"qm25-marcy-quantum-molding-25mm-x-22-8m-1-x-75ft","title":"Marcy Quantum Molding 25mm × 75ft | 1\" Universal Exterior Replacement | QM25","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Marcy QM25 is a 25mm flexible universal exterior replacement molding, sold as a 75ft roll. Suited for large glass openings on full-size trucks, commercial vehicles, and applications where a wide channel requires more coverage, it installs cleanly along the glass edge and holds its shape at the perimeter. Flexible compound navigates curves without buckling.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e QM25\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 25mm (approx. 1\")\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 75ft (22.8m) roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal exterior replacement molding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWidth Selection Guide\u003c\/h2\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the surrounding trim or channel. At 25mm, QM25 is a wide-channel option suited for large windshields, truck cab glass, and specialty applications. If your measurement falls between 1\" and 1.25\", compare QM25 against QM31 before ordering — a width that's too wide won't seat cleanly.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is Quantum Molding?\u003c\/summary\u003e\n\u003cp\u003eQuantum Molding is a flexible exterior universal replacement molding designed to fit a wide range of glass openings without requiring a vehicle-specific part. It installs along the exterior glass edge and provides a clean, weather-resistant finish. It's commonly used when OEM molding is damaged, missing, or no longer available as a direct replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat's the difference between standard and Design Line?\u003c\/summary\u003e\n\u003cp\u003eStandard Quantum Molding has a uniform profile across the full width. Design Line versions (QM16L and QM19L) feature a decorative accent on the outer face. QM25 is only available in standard — for most wide-channel applications, a clean standard profile is the appropriate choice.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I select the right width?\u003c\/summary\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the surrounding trim or pinchweld. The molding width should match this gap closely. At wider dimensions, precision matters more — too narrow and the gap shows; too wide and the molding won't seat properly. Measure before ordering.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow is this installed?\u003c\/summary\u003e\n\u003cp\u003ePress the molding into place along the glass edge, typically after the glass has been set. Work around the perimeter section by section, pressing firmly into the channel. For tight curves, a brief pass with a heat gun on low makes the molding more pliable. A molding tool or wide flathead helps seat it evenly without scuffing the surrounding trim.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow much molding does one job use?\u003c\/summary\u003e\n\u003cp\u003eA standard windshield perimeter uses approximately 12 to 16 feet of exterior molding. A 75ft roll covers roughly 4 to 6 full installs. For large truck or commercial glass where the perimeter is longer, plan on the higher end of that range per job.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46407003537623,"sku":"QM25","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/QM25-3D.jpg?v=1750120634"},{"product_id":"qm31-marcy-quantum-molding-31mm-x-15-2m-1-25-x-50ft","title":"Marcy Quantum Molding 31mm × 50ft | 1-1\/4\" Universal Exterior Replacement | QM31","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Marcy QM31 is a 31mm flexible universal exterior replacement molding — the widest option in the Quantum line — sold as a 50ft roll. Designed for specialty applications with extra-wide glass channels, it provides a clean, weather-resistant finish along the exterior glass edge. The shorter roll length reflects the reduced linear footage needed for wide-channel work.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e QM31\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 31mm (approx. 1-1\/4\")\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 50ft (15.2m) roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal exterior replacement molding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWidth Selection Guide\u003c\/h2\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the surrounding trim or channel. At 31mm, QM31 is the widest Quantum option and is reserved for applications where the exterior channel genuinely requires that coverage. If your gap measures closer to 1\", the QM25 is likely the better fit. Confirm your measurement before ordering — at this width, a mis-sized molding won't seat correctly.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is Quantum Molding?\u003c\/summary\u003e\n\u003cp\u003eQuantum Molding is a flexible exterior universal replacement molding designed to fit a wide range of glass openings without requiring a vehicle-specific part. It installs along the exterior glass edge and provides a clean, weather-resistant finish. It's commonly used when OEM molding is damaged, missing, or no longer available as a direct replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhy does QM31 come in a 50ft roll instead of 75ft?\u003c\/summary\u003e\n\u003cp\u003eAt 31mm wide, this is the largest molding in the Quantum line. Wider molding is typically used in specialty applications where less total linear footage is needed per job. A 50ft roll is still enough for 3 to 4 full installs and keeps the price proportionate to what you're actually using.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I select the right width?\u003c\/summary\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the surrounding trim or pinchweld. At wider dimensions, accuracy matters most — too narrow leaves a gap; too wide and the molding won't seat cleanly. If you're choosing between QM25 and QM31, measure carefully. Even a few millimeters makes a meaningful difference at this width.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow is this installed?\u003c\/summary\u003e\n\u003cp\u003ePress the molding into place along the glass edge, typically after the glass has been set. Work around the perimeter section by section, pressing firmly into the channel. For tight curves, a brief pass with a heat gun on low makes the molding more pliable. A molding tool or wide flathead helps seat it evenly without scuffing the surrounding trim.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow much molding does one job use?\u003c\/summary\u003e\n\u003cp\u003eFor large glass applications requiring 31mm molding, expect to use 12 to 18 feet per job depending on the glass perimeter. A 50ft roll covers roughly 3 to 4 full installs at this width.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46407008944343,"sku":"QM31","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/QM31-3D.jpg?v=1750120503"},{"product_id":"qm16l-marcy-quantum-molding-16mm-x-22-8m-5-8-x-75ft-design-line","title":"Marcy Quantum Molding 16mm × 75ft | Design Line | 5\/8\" Universal Exterior Replacement | QM16L","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Marcy QM16L is a 16mm Design Line flexible universal exterior replacement molding, sold as a 75ft roll. It shares the same flexible compound and channel-fit as the standard QM16, but adds a decorative accent integrated into the outer face — giving the installation a more styled, OEM-like appearance from the exterior. Use it when the replacement molding will be visible and the original trim had a finished look worth matching.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e QM16L\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 16mm (approx. 5\/8\")\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 75ft (22.8m) roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Design Line (decorative accent on outer face)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal exterior replacement molding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWidth Selection Guide\u003c\/h2\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the surrounding trim or channel. At 16mm, QM16L fits the same openings as the standard QM16. The Design Line distinction is about appearance, not fit — choose QM16L when aesthetics matter and the vehicle originally had a styled exterior trim detail. For a clean standard replacement, QM16 is the same width without the accent.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is Quantum Molding?\u003c\/summary\u003e\n\u003cp\u003eQuantum Molding is a flexible exterior universal replacement molding designed to fit a wide range of glass openings without requiring a vehicle-specific part. It installs along the exterior glass edge and provides a clean, weather-resistant finish. It's commonly used when OEM molding is damaged, missing, or no longer available as a direct replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat does \"Design Line\" mean?\u003c\/summary\u003e\n\u003cp\u003eDesign Line is a decorative accent — a styled ridge or groove — integrated into the outer face of the molding. It runs the full length of the strip and gives the installed molding a more finished, OEM-style appearance when viewed from the exterior. If the original vehicle molding had a visible trim detail and you want the replacement to look intentional rather than functional, Design Line is the right choice.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I select the right width?\u003c\/summary\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the surrounding trim or pinchweld. The molding width should match this gap closely. QM16L fits the same 16mm channels as the standard QM16 — the Design Line accent does not affect how the molding seats in the channel.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow is this installed?\u003c\/summary\u003e\n\u003cp\u003ePress the molding into place along the glass edge, typically after the glass has been set. Work around the perimeter section by section, pressing firmly into the channel. For tight curves, a brief pass with a heat gun on low makes the molding more pliable. A molding tool or wide flathead helps seat it evenly without scuffing the surrounding trim.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow much molding does one job use?\u003c\/summary\u003e\n\u003cp\u003eA standard windshield perimeter uses approximately 12 to 16 feet of exterior molding. A 75ft roll covers roughly 4 to 6 full installs. For smaller glass like quarter windows or rear sliders, a roll goes significantly further.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46407048757463,"sku":"QM16L","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/QM16L-3D.jpg?v=1750121046"},{"product_id":"qm19l-marcy-quantum-molding-19mm-x-22m-3-4-x-75ft-design-line","title":"Marcy Quantum Molding 19mm × 75ft | Design Line | 3\/4\" Universal Exterior Replacement | QM19L","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Marcy QM19L is a 19mm Design Line flexible universal exterior replacement molding, sold as a 75ft roll. It has the same flexible compound and channel-fit as the standard QM19, with a decorative accent integrated into the outer face for a more finished, OEM-style appearance. Use it when the replacement molding will be clearly visible and you want the installation to look intentional rather than purely functional.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e QM19L\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 19mm (approx. 3\/4\")\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 75ft (22.8m) roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Design Line (decorative accent on outer face)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal exterior replacement molding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWidth Selection Guide\u003c\/h2\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the surrounding trim or channel. At 19mm, QM19L fits the same openings as the standard QM19 — full-size cars, SUVs, pickups, and vans with wider exterior molding channels. The Design Line distinction is about aesthetics, not fit. If you prefer a clean standard profile, the QM19 is the same width without the decorative accent.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is Quantum Molding?\u003c\/summary\u003e\n\u003cp\u003eQuantum Molding is a flexible exterior universal replacement molding designed to fit a wide range of glass openings without requiring a vehicle-specific part. It installs along the exterior glass edge and provides a clean, weather-resistant finish. It's commonly used when OEM molding is damaged, missing, or no longer available as a direct replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat does \"Design Line\" mean?\u003c\/summary\u003e\n\u003cp\u003eDesign Line is a decorative accent — a styled ridge or groove — integrated into the outer face of the molding. It runs the full length of the strip and gives the installed molding a more finished, OEM-style appearance from the exterior. If the original vehicle molding had a visible trim detail and you want the replacement to look like it belongs there, Design Line is the right call.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I select the right width?\u003c\/summary\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the surrounding trim or pinchweld. The molding width should match this gap closely. QM19L fits the same 19mm channels as the standard QM19 — the Design Line accent does not affect how the molding seats in the channel.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow is this installed?\u003c\/summary\u003e\n\u003cp\u003ePress the molding into place along the glass edge, typically after the glass has been set. Work around the perimeter section by section, pressing firmly into the channel. For tight curves, a brief pass with a heat gun on low makes the molding more pliable. A molding tool or wide flathead helps seat it evenly without scuffing the surrounding trim.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow much molding does one job use?\u003c\/summary\u003e\n\u003cp\u003eA standard windshield perimeter uses approximately 12 to 16 feet of exterior molding. A 75ft roll covers roughly 4 to 6 full installs. For smaller glass like quarter windows or rear sliders, a roll goes significantly further.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46407053017303,"sku":"QM19L","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/QM19L-3D_685dfa4a-2111-4aea-a23b-fd13a32b40a2.jpg?v=1750120998"},{"product_id":"qm7-marcy-quantum-molding-7mm-x-22-8m-1-4-x-75ft","title":"Marcy Quantum Molding 7mm × 75ft | 1\/4\" Universal Exterior Replacement | QM7","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Marcy QM7 is a 7mm flexible universal exterior replacement molding, sold as a 75ft roll. Designed for narrow glass openings where a lightweight, flexible profile is needed, it installs cleanly around the glass perimeter and provides a finished, weather-resistant edge. Use it wherever OEM exterior molding is damaged, missing, or unavailable as a replacement part.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e QM7\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 7mm (approx. 1\/4\")\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 75ft (22.8m) roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal exterior replacement molding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWidth Selection Guide\u003c\/h2\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the surrounding trim or channel. At 7mm, QM7 is the narrowest option in the Quantum line — suited for compact vehicles, small quarter glass, or specialty applications with tight exterior channels. If your gap measures closer to 3\/8\", consider stepping up to the QM10.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is Quantum Molding?\u003c\/summary\u003e\n\u003cp\u003eQuantum Molding is a flexible exterior universal replacement molding designed to fit a wide range of glass openings without requiring a vehicle-specific part. It installs along the exterior glass edge and provides a clean, weather-resistant finish. It's commonly used when OEM molding is damaged, missing, or no longer available as a direct replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat's the difference between standard and Design Line?\u003c\/summary\u003e\n\u003cp\u003eStandard Quantum Molding has a uniform profile across the full width. Design Line (QM16L and QM19L) features a decorative accent integrated into the outer face of the molding, giving it a more finished, OEM-like appearance from the exterior. Design Line is the right choice when the molding will be visible and aesthetics matter.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I select the right width?\u003c\/summary\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the surrounding trim or pinchweld. The molding width should match this gap closely. Quantum Molding is flexible enough to accommodate minor variation — but if you're between sizes, the narrower width typically seats more cleanly than one that's too wide.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow is this installed?\u003c\/summary\u003e\n\u003cp\u003ePress the molding into place along the glass edge, typically after the glass has been set. Work around the perimeter section by section, pressing firmly into the channel. For tight curves, a brief pass with a heat gun on low makes the molding more pliable. A molding tool or wide flathead helps seat it evenly without scuffing the surrounding trim.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow much molding does one job use?\u003c\/summary\u003e\n\u003cp\u003eA standard windshield perimeter uses approximately 12 to 16 feet of exterior molding. A 75ft roll covers roughly 4 to 6 full installs. For smaller glass like quarter windows or rear sliders, a roll goes significantly further.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46407058489559,"sku":"QM7","price":39.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/QM7-3D.jpg?v=1750120171"},{"product_id":"qm10-marcy-quantum-molding-9-5mm-x-22-8m-3-8-x-75ft","title":"Marcy Quantum Molding 9.5mm × 75ft | 3\/8\" Universal Exterior Replacement | QM10","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Marcy QM10 is a 9.5mm flexible universal exterior replacement molding, sold as a 75ft roll. A popular mid-narrow width, it fits a broad range of import and compact domestic vehicles where exterior glass molding has cracked, shrunk, or gone missing. Flexible compound installs cleanly around curves and holds its shape at the glass perimeter.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e QM10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 9.5mm (approx. 3\/8\")\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 75ft (22.8m) roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Universal exterior replacement molding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWidth Selection Guide\u003c\/h2\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the surrounding trim or channel on the vehicle. At 9.5mm, QM10 is a common fit for compact cars, sedans, and many import vehicles with mid-narrow exterior molding channels. If your gap measures closer to 1\/4\", step down to QM7; if it's closer to 5\/8\", move up to QM16.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is Quantum Molding?\u003c\/summary\u003e\n\u003cp\u003eQuantum Molding is a flexible exterior universal replacement molding designed to fit a wide range of glass openings without requiring a vehicle-specific part. It installs along the exterior glass edge and provides a clean, weather-resistant finish. It's commonly used when OEM molding is damaged, missing, or no longer available as a direct replacement.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat's the difference between standard and Design Line?\u003c\/summary\u003e\n\u003cp\u003eStandard Quantum Molding has a uniform profile across the full width. Design Line (QM16L and QM19L) features a decorative accent integrated into the outer face of the molding, giving it a more finished, OEM-like appearance from the exterior. For a clean but understated profile, standard is the right call.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I select the right width?\u003c\/summary\u003e\n\u003cp\u003eMeasure the gap between the glass edge and the surrounding trim or pinchweld. The molding width should match this gap closely. Quantum Molding is flexible enough to accommodate minor variation — but if you're between sizes, the narrower width typically seats more cleanly than one that's too wide.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow is this installed?\u003c\/summary\u003e\n\u003cp\u003ePress the molding into place along the glass edge, typically after the glass has been set. Work around the perimeter section by section, pressing firmly into the channel. For tight curves, a brief pass with a heat gun on low makes the molding more pliable. A molding tool or wide flathead helps seat it evenly without scuffing the surrounding trim.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow much molding does one job use?\u003c\/summary\u003e\n\u003cp\u003eA standard windshield perimeter uses approximately 12 to 16 feet of exterior molding. A 75ft roll covers roughly 4 to 6 full installs. For smaller glass like quarter windows or rear sliders, a roll goes significantly further.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46407070220503,"sku":"QM10","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/QM10-3D.jpg?v=1750119398"},{"product_id":"me615s-marcy-solid-core-butyl-tape-round-1-4-x-15ft-bulk","title":"Marcy Solid-Core Butyl Tape — 1\/4\" × 15ft | Bulk Pack | ME615S","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME615S solid-core butyl tape in a 15-foot bulk roll — the 1\/4\" round profile for shops doing high-volume mechanically-fastened glass work where cost per foot matters. Same all-weather solid butyl formula as the individually boxed ME625, in a longer roll with a lower cost per foot. Suitable for sealing mechanically-fastened side and back glass, re-adhering door vapor barriers, and general automotive sealing tasks. Made in the USA. \u003cstrong\u003eNot intended for windshield installation — use foam-core butyl (ME612C or ME810B) for windshield applications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME615S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/4\" (6.4mm) round × 15ft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e Solid-core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Bulk roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mechanically-fastened side and back glass, door vapor barriers, general automotive sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply along the glass channel or frame opening before pressing the glass into position. Cut to length as needed. For mechanically-fastened side, rear, and quarter glass, door poly vapor barrier re-adhesion, and general body sealing tasks. Do not use for urethane windshield installations.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is solid-core butyl used for?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl seals mechanically-fastened glass — side windows, vent glass, sliding rear windows, and quarter glass where fasteners hold position. Also used for door poly vapor barrier re-adhesion and general body sealing. It is not the correct product for urethane-bonded windshield installation — use foam-core butyl for those applications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between the bulk ME615S and the boxed ME625?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eBoth contain the same 1\/4\" solid-core butyl formula. ME625 is individually boxed in a pre-cut 10-foot single-application length — ideal for mobile installers who want clean, ready-to-use tape on the job. ME615S is a 15-foot bulk roll at a lower cost per foot — better suited to shop environments doing multiple installations where roll management is practical and material cost per job matters.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 1\/4\" vs. 5\/16\" vs. 3\/8\" solid butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 1\/4\" profile (ME615S\/ME625) handles the majority of standard applications and is the most commonly used diameter. Use 5\/16\" (ME815S\/ME825) or 3\/8\" (ME915S\/ME925) when the channel or gap is wider and a fuller bead is needed to seal properly. Match the profile to the gap width in the seated glass position.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes solid butyl work in both hot and cold weather?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Marcy solid butyl is formulated for all-weather use. In cold temperatures it stiffens slightly — warm slightly before application for better conformability. In hot weather it's softer and more pliable, aiding application but requiring care not to stretch the bead during placement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between solid-core and foam-core butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl is an all-butyl bead suited for mechanically-fastened glass and sealing tasks. Foam-core has a cellular foam center that compresses and rebounds — required for urethane windshield installation where the foam fills settling voids during cure. Do not substitute one for the other in windshield applications.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46410210836695,"sku":"ME615S","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/marcy-butyl-tape-e0dd5321-2_16dea319-fa6a-4ce7-a7c4-414e759451ff.webp?v=1750020933"},{"product_id":"me815s-marcy-solid-core-butyl-tape-5-16-x-15ft-round-bulk","title":"Marcy Solid-Core Butyl Tape — 5\/16\" × 15ft | Bulk Pack | ME815S","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME815S solid-core butyl tape in a 15-foot bulk roll — the 5\/16\" round profile for shops doing high-volume mechanically-fastened glass work where a medium-diameter bead is needed. Same all-weather solid butyl formula as the individually boxed ME825, in a longer roll at a lower cost per foot. For applications where the standard 1\/4\" diameter is too narrow to seal the channel completely. Made in the USA. \u003cstrong\u003eNot intended for windshield installation — use foam-core butyl (ME612C or ME810B) for windshield applications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME815S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5\/16\" (7.9mm) round × 15ft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e Solid-core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Bulk roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mechanically-fastened side and back glass, general automotive sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply along the glass channel or frame opening before pressing the glass into position. Cut to length as needed. The 5\/16\" profile fills wider channels than the standard 1\/4\" — common on mid-size trucks, vans, and SUVs. Do not use for urethane windshield installations.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is solid-core butyl used for?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl seals mechanically-fastened glass — side windows, vent glass, sliding rear windows, and quarter glass where fasteners hold position. Also used for door poly vapor barrier re-adhesion and general body sealing. It is not the correct product for urethane-bonded windshield installation — use foam-core butyl for those applications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between the bulk ME815S and the boxed ME825?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eBoth contain the same 5\/16\" solid-core butyl formula. ME825 is individually boxed in a pre-cut 10-foot single-application length — ideal for mobile installers. ME815S is a 15-foot bulk roll at a lower cost per foot — better suited to shop environments doing multiple installations where material cost per job is the priority.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 5\/16\" instead of 1\/4\" or 3\/8\"?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eUse 5\/16\" when the channel gap is too wide for the 1\/4\" to fill completely, but the 3\/8\" would make glass positioning difficult. The 5\/16\" is the middle profile — common on mid-size trucks, vans, and SUVs with moderately wider channels than standard passenger cars. Match the profile to the gap width in the seated glass position.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes solid butyl work in both hot and cold weather?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Marcy solid butyl is formulated for all-weather use. Warm slightly in cold conditions for better conformability. In hot weather, handle carefully to avoid stretching the bead during placement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between solid-core and foam-core butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core is an all-butyl bead suited for mechanically-fastened glass and general sealing. Foam-core has a foam center that rebounds to fill voids — required for urethane windshield installation. Do not substitute one for the other in windshield applications.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46410306486487,"sku":"ME815S","price":12.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/marcy-butyl-tape-e0dd5321-2_685b4ec2-b7e3-4775-87c5-87661344dabd.webp?v=1750020900"},{"product_id":"me915s-marcy-solid-core-butyl-tape-3-8-x-15ft-round-bulk","title":"Marcy Solid-Core Butyl Tape — 3\/8\" × 15ft | Bulk Pack | ME915S","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME915S solid-core butyl tape in a 15-foot bulk roll — the 3\/8\" round profile for shops doing high-volume work on larger vehicle channels and commercial applications requiring a heavy butyl bead. Same all-weather solid butyl formula as the individually boxed ME925, in a longer roll at a lower cost per foot. The widest standard solid butyl profile, filling gaps that smaller diameters can't seal completely. Made in the USA. \u003cstrong\u003eNot intended for windshield installation — use foam-core butyl (ME612C or ME810B) for windshield applications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME915S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8\" (9.5mm) round × 15ft\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCore Type:\u003c\/strong\u003e Solid-core\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e Bulk roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Mechanically-fastened glass with wide channels, commercial vehicle sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply along the glass channel or frame opening before pressing the glass into position. Cut to length as needed. The 3\/8\" profile fills large channel gaps on full-size trucks, vans, and commercial vehicles where smaller diameters would leave voids. Do not use for urethane windshield installations.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is solid-core butyl used for?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core butyl seals mechanically-fastened glass — side windows, vent glass, sliding rear windows, and quarter glass where fasteners hold position. Also used for general automotive body sealing. It is not the correct product for urethane-bonded windshield installation — use foam-core butyl for those applications.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between the bulk ME915S and the boxed ME925?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eBoth contain the same 3\/8\" solid-core butyl formula. ME925 is individually boxed in a pre-cut 10-foot single-application length — ideal for mobile installers. ME915S is a 15-foot bulk roll at a lower cost per foot — better suited to shops doing high-volume work where material efficiency is the priority.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen should I use 3\/8\" instead of 1\/4\" or 5\/16\"?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 3\/8\" profile (ME915S\/ME925) is used when the channel gap is large enough that smaller diameters don't fill it completely. Most common on larger trucks, full-size vans, and commercial vehicles with wide glass channels. When in doubt, verify the channel width with the glass in the seated position — the butyl should compress to fill the gap without excessive resistance.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes solid butyl work in both hot and cold weather?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Marcy solid butyl is formulated for all-weather use. Warm slightly in cold conditions for better conformability. In hot weather, handle carefully to avoid stretching the bead during placement.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between solid-core and foam-core butyl?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSolid-core is an all-butyl bead suited for mechanically-fastened glass and general sealing. Foam-core has a foam center that rebounds to fill settling voids — required for urethane windshield installation. Do not substitute one for the other in windshield applications.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46410372808919,"sku":"ME915S","price":14.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/marcy-butyl-tape-e0dd5321-2.webp?v=1750020865"},{"product_id":"me0076-marcy-molding-retention-tape-1-5-x-108ft-blue","title":"Marcy Molding Retention Tape — 1.5\" × 108ft | Blue | ME0076","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME0076 molding retention tape in blue holds exterior mouldings firmly in position while urethane cures, then peels away cleanly without lifting paint or leaving adhesive residue. The 1.5\" width covers most exterior moulding profiles in one strip. Blue gives technicians a clear visual reference to confirm full moulding coverage before the vehicle leaves the bay — easy to see on any paint color. Printed \"REMOVE WITHIN 24 HOURS\" along the length to prevent customer comebacks from delayed removal. Perforated every foot for easy hand-tearing without scissors.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME0076\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1.5\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 108ft per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Blue\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Exterior moulding retention during urethane cure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply directly over the installed moulding to hold it in position while the urethane adhesive beneath fully cures. Remove within 24 hours of application. Compatible with factory paint, clear coat, and most vinyl and wrap finishes. Perforated every foot for clean hand-tearing to any length.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow long should I leave the retention tape on?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eRemove within 24 hours — this reminder is printed directly on the tape to prevent customer callbacks. Leaving it longer increases adhesive bond strength, especially in heat and direct sun, and can make clean removal difficult or cause paint damage. In hot conditions, err toward earlier removal.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this tape pull paint or leave residue?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eMarcy retention tape is formulated specifically for automotive exterior painted surfaces and is designed to release cleanly when removed within the 24-hour window. It works on factory paint, clear coat, and most films and wraps. Adhesive bond strength increases with heat and time, so prompt removal is the key to residue-free release.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat's the difference between clear, blue, and orange?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eClear (ME0073), blue (ME0076), and orange (ME0072) all perform identically — the difference is visual only. Blue is the most popular shop color — visible against most paint finishes, making it easy to confirm coverage and find tape edges when removing. Clear is preferred when the vehicle may be seen by the customer before removal. Orange gives the highest visibility contrast on lighter vehicles.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow much tape does a typical moulding job use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eA typical windshield moulding installation uses 8–14 feet depending on glass size and moulding run length. At 108 feet per roll, one roll covers approximately 8–12 complete windshield jobs. Door panel or quarter moulding strips use 3–6 feet per panel.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs this tape UV and weather resistant?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Marcy retention tape is all-weather and UV-resistant, designed to hold through rain, heat, cold, and direct sun during the urethane cure period. Even if the vehicle is driven or sits outside before you return to remove the tape, it maintains adhesion and peels cleanly within the 24-hour window.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46412452102359,"sku":"ME0076","price":6.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/GTME0076_MarcyBlueWindshieldAdhesiveTape_Angle1_530x_2x_1.webp?v=1756321105"},{"product_id":"me0072-marcy-molding-retention-tape-1-5-x-108ft-orange","title":"Marcy Molding Retention Tape — 1.5\" × 108ft | Orange | ME0072","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME0072 molding retention tape in orange holds exterior mouldings firmly in position while urethane cures, then peels away cleanly without lifting paint or leaving adhesive residue. The 1.5\" width covers most exterior moulding profiles in one strip. Orange is the most visible color in the Marcy lineup — easy to spot on any paint color and simple to confirm full moulding coverage at a glance. Printed \"REMOVE WITHIN 24 HOURS\" along the length to prevent customer comebacks from delayed removal. Perforated every foot for easy hand-tearing without scissors.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME0072\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 1.5\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 108ft per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Orange\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Exterior moulding retention during urethane cure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply directly over the installed moulding to hold it in position while the urethane adhesive beneath fully cures. Remove within 24 hours of application. Compatible with factory paint, clear coat, and most vinyl and wrap finishes. Perforated every foot for clean hand-tearing to any length.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow long should I leave the retention tape on?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eRemove within 24 hours — this reminder is printed directly on the tape to prevent customer callbacks. Leaving it longer increases adhesive bond strength, especially in heat and direct sun, and can make clean removal difficult or cause paint damage. In hot conditions, err toward earlier removal.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill this tape pull paint or leave residue?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eMarcy retention tape is formulated specifically for automotive exterior painted surfaces and is designed to release cleanly when removed within the 24-hour window. It works on factory paint, clear coat, and most films and wraps. Adhesive bond strength increases with heat and time, so prompt removal is the key to residue-free release.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat's the difference between clear, blue, and orange?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eClear (ME0073), blue (ME0076), and orange (ME0072) all perform identically — the difference is visual only. Orange provides the highest contrast visibility and is easiest to see and remove cleanly, especially in poor lighting. Blue is the most common shop color. Clear is the least visible on the vehicle, preferred when the customer may see the car before tape removal.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow much tape does a typical moulding job use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eA typical windshield moulding installation uses 8–14 feet depending on glass size and moulding run length. At 108 feet per roll, one roll covers approximately 8–12 complete windshield jobs. Door panel or quarter moulding strips use 3–6 feet per panel.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs this tape UV and weather resistant?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Marcy retention tape is all-weather and UV-resistant, designed to hold through rain, heat, cold, and direct sun during the urethane cure period. Even if the vehicle is driven or sits outside before you return to remove the tape, it maintains adhesion and peels cleanly within the 24-hour window.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46412737839319,"sku":"ME0072","price":6.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/GTME0072_MarcyOrangeWindshieldAdhesiveTape_Angle1_530x_2x_1.webp?v=1756321045"},{"product_id":"me1008-200-marcy-masking-tape-2-x-60yds-black","title":"Marcy Automotive Masking Tape — 2\" × 60 yds | Black | ME1008-200","description":"\u003cp\u003e✅ \u003cstrong\u003eIn Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMarcy ME1008-200 automotive masking tape in black — the professional-grade tape for protecting painted surfaces during windshield replacement, body work, and moulding installation. Peels cleanly without leaving residue and resists outdoor weathering including rain, heat, cold, and UV. The 2\" width covers pinch welds, trim edges, and body panels efficiently in one pass. Black color blends naturally on dark vehicles and in applications where low visual contrast is preferred before tape removal. Tears by hand — no scissors needed.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e ME1008-200\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 60 yards per roll\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Surface masking and paint protection during auto glass and body work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply to painted surfaces, trim, and body panels before glass removal or installation to protect against adhesive drips, urethane contamination, and tool contact. Tear by hand to length. Remove promptly after work is complete — extended exposure to heat and sun increases adhesive bond strength and can make removal more difficult.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs this tape safe for automotive paint?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy masking tape is formulated for automotive painted surfaces and is designed to peel cleanly without lifting clear coat or leaving adhesive residue when removed promptly. As with all masking tapes, remove it the same day it's applied; extended exposure to direct sun and heat increases adhesive bond strength and can make clean removal more difficult.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat does \"weather resistant\" mean for a masking tape?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eWeather-resistant means the tape maintains its adhesion and won't curl, blow off, or saturate in rain, heat, cold, or direct sunlight during a typical workday. For auto glass jobs where vehicles sit outside during urethane cure, the tape stays in place and peels cleanly when you're ready to remove it. It is not intended for long-term outdoor exposure — remove it the same day.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat's the difference between black and blue Marcy masking tape?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eME1008-200 (black) and ME1007-200 (blue) perform identically — the difference is color. Black is preferred when working on dark vehicles where blue would contrast visually, or when a low-visibility masking appearance is preferred for customer-facing work. Blue is the standard shop choice and is easier to see when confirming full coverage on most vehicle colors.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan this tape be torn by hand?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes — Marcy masking tape tears cleanly by hand without scissors. For mobile installers and busy shop work, this makes applying and cutting lengths fast without stopping to find a blade. Tear from the roll edge for a clean, straight tear.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow much masking tape does a typical windshield job use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eA typical windshield masking job uses 10–20 feet of tape to protect the pinch weld, cowl, and surrounding painted panels. At 60 yards (180 feet) per roll, one ME1008-200 covers approximately 9–18 complete windshield jobs. High-volume shops typically go through one roll every few days.\u003c\/p\u003e\n\u003c\/details\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":46419333447895,"sku":"","price":12.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/Masking-tape-blue-black-20ff0183.webp?v=1749948818"},{"product_id":"marcy-quickcure-rain-sensor-gel-12ml-10-pack-qc12-10","title":"Marcy QuickCure Rain Sensor Gel — 12ml | 10 Pack | QC12-10","description":"\u003cp\u003e10-pack of Marcy QuickCure Rain Sensor Gel 12ml syringes, each with 3 mixing nozzles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast cure: approximately 4 minutes at 70°F\u003c\/li\u003e\n\u003cli\u003eMulti-use 12ml format helps reduce waste\u003c\/li\u003e\n\u003cli\u003eClean removal after full cure\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAuto Glass Week Show Special price: $119.80 per 10 pack, August 24–29, 2026.\u003c\/p\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":49623888756951,"sku":"QC12-10","price":119.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/s-l1600-807794462.jpg?v=1702929189"},{"product_id":"marcy-quickcure-rain-sensor-gel-4ml-10-pack-qc4-10","title":"Marcy QuickCure Rain Sensor Gel — 4ml | 10 Pack | QC4-10","description":"\u003cp\u003e10-pack of Marcy QuickCure Rain Sensor Gel 4ml syringes, each with a mixing nozzle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFast cure: approximately 4 minutes at 70°F\u003c\/li\u003e\n\u003cli\u003eCreates a clean, reliable crown\u003c\/li\u003e\n\u003cli\u003eIdeal for warranty work and redo installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAuto Glass Week Show Special price: $59.80 per 10 pack, August 24–29, 2026.\u003c\/p\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":49623888789719,"sku":"QC4-10","price":59.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/61r-8VfsyTL._AC_SL1500_40654786-9bbf-4e2e-9334-40caa215fdee.jpg?v=1705022865"},{"product_id":"marcy-rain-sensor-pad-32mm-round-10-pack-msp1845-10","title":"Marcy Rain Sensor Pad — 32mm Round | 10 Pack | MSP1845-10","description":"\u003cp\u003e10-pack of Marcy 32mm round rain sensor pads.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSilicone for easy handling\u003c\/li\u003e\n\u003cli\u003eFingerprint-resistant and thicker for a better fit\u003c\/li\u003e\n\u003cli\u003eRecycled and recyclable RPET packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAuto Glass Week Show Special price: $39.80 per 10 pack, August 24–29, 2026.\u003c\/p\u003e","brand":"Marcy","offers":[{"title":"Default Title","offer_id":49623888855255,"sku":"MSP1845-10","price":39.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/files\/Screenshot2023-12-18at4.25.27PM_f6e87084-0ba3-4ea6-bc6b-744060c9be0e.png?v=1706231016"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/4262\/6461\/collections\/Marcy.png?v=1702948829","url":"https:\/\/southmountainsupply.com\/collections\/marcy.oembed?page=3","provider":"South Mountain Supply ","version":"1.0","type":"link"}